[PATCH] arm64: dts: imx8mp-evk: Specify ADV7535 register addresses

[Liu Ying]

Hi Frank,

On Tue, Mar 24, 2026 at 10:42:59AM -0400, Frank Li wrote:
> On Tue, Mar 24, 2026 at 01:52:03PM +0800, Liu Ying wrote:
>> MIPI DSI to HDMI bridge ADV7535 CEC default register address is 0x3c
>> on an I2C bus.  And, OV5640 camera uses the same address on the same
>> I2C bus.  To resolve this conflict, use 0x3b as ADV7535 CEC register
>> address by specifying all ADV7535 register addresses.
> 
> Does cec start address programmable?  generally i2c address is fixed or
> controller by some gpio.

Yes, it's programmable.  Quote adi,adv7533.yaml:

  reg:
    description: |
      I2C slave addresses.

      The ADV7533/35 internal registers are split into four pages
      exposed through different I2C addresses, creating four register
      maps. Each map has it own I2C address and acts as a standard slave
      device on the I2C bus. The main address is mandatory, others are
      optional and revert to defaults if not specified.
    minItems: 1
    maxItems: 4

  reg-names:
    description:
      Names of maps with programmable addresses. It can contain any map
      needing a non-default address.
    minItems: 1
    items:
      - const: main
      - const: edid
      - const: cec
      - const: packet

> 
> Frank
>>
>> Fixes: 6f6c18cba16f ("arm64: dts: imx8mp-evk: add camera ov5640 and related nodes")
>> Signed-off-by: Liu Ying <victor.liu at nxp.com>
>> ---
>>  arch/arm64/boot/dts/freescale/imx8mp-evk.dts | 3 ++-
>>  1 file changed, 2 insertions(+), 1 deletion(-)
>>
>> diff --git a/arch/arm64/boot/dts/freescale/imx8mp-evk.dts b/arch/arm64/boot/dts/freescale/imx8mp-evk.dts
>> index aedc09937716..d0a2bd975a18 100644
>> --- a/arch/arm64/boot/dts/freescale/imx8mp-evk.dts
>> +++ b/arch/arm64/boot/dts/freescale/imx8mp-evk.dts
>> @@ -602,7 +602,8 @@ ov5640_mipi_0_ep: endpoint {
>>
>>  	hdmi at 3d {
>>  		compatible = "adi,adv7535";
>> -		reg = <0x3d>;
>> +		reg = <0x3d>, <0x3f>, <0x3b>, <0x38>;
>> +		reg-names = "main", "edid", "cec", "packet";
>>  		interrupt-parent = <&gpio1>;
>>  		interrupts = <9 IRQ_TYPE_EDGE_FALLING>;
>>  		adi,dsi-lanes = <4>;
>>
>> ---
>> base-commit: 09c0f7f1bcdbc3c37a5a760cbec76bf18f278406
>> change-id: 20260324-imx8mp-evk-adv7535-cec-reg-addr-2de67760133a
>>
>> Best regards,
>> --
>> Liu Ying <victor.liu at nxp.com>
>>

-- 
Regards,
Liu Ying