[PATCH] arm64: dts: imx8mp: Add DT overlays for DH i.MX8M Plus DHCOM SoM and boards

[Frank Li]

On Tue, Mar 24, 2026 at 06:39:10PM +0100, Marek Vasut wrote:
> On 3/24/26 5:01 PM, Frank Li wrote:
> > On Fri, Mar 13, 2026 at 12:24:04AM +0100, Marek Vasut wrote:
> > ...
> >
> > > diff --git a/arch/arm64/boot/dts/freescale/imx8mp-dhcom-overlay-panel-ch101olhlwh.dtsi b/arch/arm64/boot/dts/freescale/imx8mp-dhcom-overlay-panel-ch101olhlwh.dtsi
> > > new file mode 100644
> > > index 0000000000000..534737363c9f0
> > > --- /dev/null
> > > +++ b/arch/arm64/boot/dts/freescale/imx8mp-dhcom-overlay-panel-ch101olhlwh.dtsi
> > > @@ -0,0 +1,42 @@
> > > +// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
> > > +/*
> > > + * Copyright (C) 2022 Marek Vasut
> >
> > 2026?
>
> That was the original copyright year when this was implemented, but I can
> update it to 2022-2026 ?

Okay, you upstream this year.

>
> > > + */
> > > +
> > > +&display_bl {
> > > +	pwms = <&pwm1 0 5000000 0>;
> > > +};
> > > +
> > > +&DH_OVERLAY_PANEL_I2C_BUS {
> >
> > why upcase for label, generally it should be lower case
>
> Because this label is really a macro , please read on.
>
> > > +	#address-cells = <1>;
> > > +	#size-cells = <0>;
> > > +
> > > +	touchscreen at 41 {
> > > +		compatible = "ilitek,ili251x";
> > > +		pinctrl-0 = <DH_OVERLAY_PANEL_I2C_TOUCHSCREEN_PINCTRL>;
> > > +		pinctrl-names = "default";
> > > +		reg = <0x41>;
> >
> > reg should second property,  please dt-format for new dts files.
> > check others
> What is "dt-format" ? Linux kernel source tree, even current next, does not
> mention such a tool . I did run schema check and checkpatch on these
> patches. obv.

I send out at many place, https://github.com/lznuaa/dt-format
I write small tools to detect and fix node and property order problem,
it may be buggy.

These node order problem is easy to detected and fix by tools to save
review cycle and focus on the important stuff.

Frank

>
> > > +		interrupt-parent = <&DH_OVERLAY_PANEL_I2C_TOUCHSCREEN_IRQ_PARENT>;
> > ...
> > > +
> > > +	ports {
> > > +		#address-cells = <1>;
> > > +		#size-cells = <0>;
> > > +
> > > +		port at 1 {
> > > +			reg = <1>;
> >
> > need empty line between child node and property.
>
> Fixed in V2
>
> > > +	#size-cells = <0>;
> > > +
> > > +	eeprom at 56 {
> > > +		compatible = "atmel,24c04";
> > > +		reg = <0x56>;
> > > +		pagesize = <16>;
> > > +	};
> > > +};
> > > +
> > > +&ecspi2 {
> > > +	status = "okay";
> >
> > status should be last property. I stop here because these
> > should be identify by tools/script
> Neither checkpatch nor schema validation complained about these.
>
> I moved the status=okay to the end. Anything else I should update ?