[PATCH v2 2/6] gpio: move hogs into GPIO core

[Geert Uytterhoeven]

Hi Bartosz,

On Mon, 9 Mar 2026 at 13:43, Bartosz Golaszewski
<bartosz.golaszewski at oss.qualcomm.com> wrote:
> Refactor line hogging code by moving the parts duplicated in
> gpiolib-acpi-core.c and gpiolib-of.c into gpiolib.c, leaving just the
> OF-specific bits in the latter.
>
> This makes fwnode the primary API for setting up hogs and allows to use
> software nodes in addition to ACPI and OF nodes.
>
> Reviewed-by: Mika Westerberg <mika.westerberg at linux.intel.com>
> Reviewed-by: Linus Walleij <linusw at kernel.org>
> Reviewed-by: Andy Shevchenko <andriy.shevchenko at linux.intel.com>
> Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski at oss.qualcomm.com>

Thanks for your patch, which is now commit d1d564ec4992945d ("gpio:
move hogs into GPIO core") in gpio/gpio/for-next.

This breaks GPIO on the Renesas Marzen (R-Car H1) board:

    -gpio_rcar ffc40000.gpio: driving 32 GPIOs
    +gpiochip_add_data_with_key: GPIOs 512..543 (ffc40000.gpio) failed
to register, -22
    +gpio_rcar ffc40000.gpio: failed to add GPIO controller
    +gpio_rcar ffc40000.gpio: probe with driver gpio_rcar failed with error -22

> --- a/drivers/gpio/gpiolib.c
> +++ b/drivers/gpio/gpiolib.c
> @@ -960,6 +960,98 @@ static void machine_gpiochip_add(struct gpio_chip *gc)
>         }
>  }
>
> +int gpiochip_add_hog(struct gpio_chip *gc, struct fwnode_handle *fwnode)
> +{
> +       struct fwnode_handle *gc_node = dev_fwnode(&gc->gpiodev->dev);
> +       struct fwnode_reference_args gpiospec;
> +       enum gpiod_flags dflags;
> +       struct gpio_desc *desc;
> +       unsigned long lflags;
> +       const char *name;
> +       int ret, argc;
> +       u32 gpios[3]; /* We support up to three-cell bindings. */
> +       u32 cells;
> +
> +       lflags = GPIO_LOOKUP_FLAGS_DEFAULT;
> +       dflags = GPIOD_ASIS;
> +       name = NULL;
> +
> +       argc = fwnode_property_count_u32(fwnode, "gpios");
> +       if (argc < 0)
> +               return argc;
> +       if (argc > 3)
> +               return -EINVAL;

The GPIO hog at [1] has a gpios property with two entries:

    gpios = <17 GPIO_ACTIVE_LOW>, <18 GPIO_ACTIVE_LOW>;

hence argc = 4, which is considered invalid.

The check should take into account the actual value of #gpio-cells,
and handle the presence of multiple GPIOs.

"git grep -Ww gpio-hog -- arch/*/boot/dts/ | grep 'gpios\s*=.*>,'" finds
several other places where multiple GPIOs are specified.

> +
> +       ret = fwnode_property_read_u32_array(fwnode, "gpios", gpios, argc);
> +       if (ret < 0)
> +               return ret;
> +
> +       if (is_of_node(fwnode)) {
> +               /*
> +                * OF-nodes need some additional special handling for
> +                * translating of devicetree flags.
> +                */
> +               ret = fwnode_property_read_u32(gc_node, "#gpio-cells", &cells);
> +               if (ret)
> +                       return ret;
> +               if (!ret && argc != cells)
> +                       return -EINVAL;
> +
> +               memset(&gpiospec, 0, sizeof(gpiospec));
> +               gpiospec.fwnode = fwnode;
> +               gpiospec.nargs = argc;
> +
> +               for (int i = 0; i < argc; i++)
> +                       gpiospec.args[i] = gpios[i];
> +
> +               ret = of_gpiochip_get_lflags(gc, &gpiospec, &lflags);
> +               if (ret)
> +                       return ret;
> +       } else {
> +               /*
> +                * GPIO_ACTIVE_LOW is currently the only lookup flag
> +                * supported for non-OF firmware nodes.
> +                */
> +               if (gpios[1])
> +                       lflags |= GPIO_ACTIVE_LOW;
> +       }
> +
> +       if (fwnode_property_present(fwnode, "input"))
> +               dflags |= GPIOD_IN;
> +       else if (fwnode_property_present(fwnode, "output-low"))
> +               dflags |= GPIOD_OUT_LOW;
> +       else if (fwnode_property_present(fwnode, "output-high"))
> +               dflags |= GPIOD_OUT_HIGH;
> +       else
> +               return -EINVAL;
> +
> +       fwnode_property_read_string(fwnode, "line-name", &name);
> +
> +       desc = gpiochip_get_desc(gc, gpios[0]);
> +       if (IS_ERR(desc))
> +               return PTR_ERR(desc);
> +
> +       return gpiod_hog(desc, name, lflags, dflags);
> +}

[1] https://elixir.bootlin.com/linux/v6.19.9/source/arch/arm/boot/dts/renesas/r8a7779-marzen.dts#L196

Gr{oetje,eeting}s,

                        Geert

-- 
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert at linux-m68k.org

In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
                                -- Linus Torvalds