[PATCH 1/2] dt-bindings: watchdog: Convert TS-4800 to DT schema

[Frank Li]

On Mon, Mar 23, 2026 at 10:46:12AM +0200, Eduard Bostina wrote:
> Convert the Technologic Systems TS-4800 watchdog timer bindings
> to DT schema.
>
> Signed-off-by: Eduard Bostina <egbostina at gmail.com>
> ---
> Note:
> * This patch is part of the GSoC2026 application process for device tree bindings conversions
> * https://github.com/LinuxFoundationGSoC/ProjectIdeas/wiki/GSoC-2026-Device-Tree-Bindings
>
>  .../watchdog/technologic,ts4800-wdt.yaml      | 46 +++++++++++++++++++
>  .../bindings/watchdog/ts4800-wdt.txt          | 25 ----------
>  2 files changed, 46 insertions(+), 25 deletions(-)
>  create mode 100644 Documentation/devicetree/bindings/watchdog/technologic,ts4800-wdt.yaml
>  delete mode 100644 Documentation/devicetree/bindings/watchdog/ts4800-wdt.txt
>
> diff --git a/Documentation/devicetree/bindings/watchdog/technologic,ts4800-wdt.yaml b/Documentation/devicetree/bindings/watchdog/technologic,ts4800-wdt.yaml
> new file mode 100644
> index 000000000..cb2066b4b
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/watchdog/technologic,ts4800-wdt.yaml
> @@ -0,0 +1,46 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/watchdog/technologic,ts4800-wdt.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Technologic Systems TS-4800 Watchdog
> +
> +maintainers:
> +  - Eduard Bostina <egbostina at gmail.com>
> +
> +allOf:
> +  - $ref: watchdog.yaml#

Move allOf after required incase add if-else branch later.

> +
> +properties:
> +  compatible:
> +    const: technologic,ts4800-wdt
> +
> +  syscon:
> +    $ref: /schemas/types.yaml#/definitions/phandle-array
> +    items:
> +      - items:
> +          - description: Phandle to the FPGA's syscon
> +          - description: Offset to the watchdog register
> +    description: Phandle / integers array that points to the syscon node which
> +      describes the FPGA's syscon registers.
> +
> +required:
> +  - compatible
> +  - syscon
> +
> +unevaluatedProperties: false
> +
> +examples:
> +  - |
> +    syscon: syscon at b0010000 {
> +      compatible = "syscon", "simple-mfd";
> +      reg = <0xb0010000 0x3d>;
> +      reg-io-width = <2>;
> +

Needn't this part. just keep below watchdog node should be enough.

Frank

> +      watchdog {
> +        compatible = "technologic,ts4800-wdt";
> +        syscon = <&syscon 0xe>;
> +        timeout-sec = <10>;
> +      };
> +    };
> diff --git a/Documentation/devicetree/bindings/watchdog/ts4800-wdt.txt b/Documentation/devicetree/bindings/watchdog/ts4800-wdt.txt
> deleted file mode 100644
> index 8f6caad42..000000000
> --- a/Documentation/devicetree/bindings/watchdog/ts4800-wdt.txt
> +++ /dev/null
> @@ -1,25 +0,0 @@
> -Technologic Systems Watchdog
> -
> -Required properties:
> -- compatible: must be "technologic,ts4800-wdt"
> -- syscon: phandle / integer array that points to the syscon node which
> -          describes the FPGA's syscon registers.
> -          - phandle to FPGA's syscon
> -          - offset to the watchdog register
> -
> -Optional property:
> -- timeout-sec: contains the watchdog timeout in seconds.
> -
> -Example:
> -
> -syscon: syscon at b0010000 {
> -	compatible = "syscon", "simple-mfd";
> -	reg = <0xb0010000 0x3d>;
> -	reg-io-width = <2>;
> -
> -	wdt at e {
> -		compatible = "technologic,ts4800-wdt";
> -		syscon = <&syscon 0xe>;
> -		timeout-sec = <10>;
> -	};
> -}
> --
> 2.53.0
>