[PATCH v2 4/4] dt-bindings: iio: adc: xlnx,axi-xadc: convert to DT schema

[Rob Herring (Arm)]

On Mon, 23 Mar 2026 13:15:05 +0530, Sai Krishna Potthuri wrote:
> Convert the xilinx-xadc.txt to DT schema and remove the old text binding.
> Update xilinx-xadc binding path to YAML format in MAINTAINERS file.
> 
> The 'xlnx,channels' property is a container node(type: object) with
> a vendor prefix, which triggers the below warning:
>   "properties:xlnx,channels:type: 'boolean' was expected"
> 
> This cannot be changed because the original text binding specified
> 'xlnx,channels' since 2014, driver explicitly looks up "xlnx,channels"
> using device_get_named_child_node() and removing the vendor prefix
> would break backward compatibility with existing device trees.
> Also, keep all vendor-prefixed properties from the original binding to
> maintain backward compatibility with existing devicetrees and driver code.
> 
> Signed-off-by: Sai Krishna Potthuri <sai.krishna.potthuri at amd.com>
> ---
>  .../bindings/iio/adc/xilinx-xadc.txt          | 141 ----------------
>  .../bindings/iio/adc/xlnx,axi-xadc.yaml       | 154 ++++++++++++++++++
>  2 files changed, 154 insertions(+), 141 deletions(-)
>  delete mode 100644 Documentation/devicetree/bindings/iio/adc/xilinx-xadc.txt
>  create mode 100644 Documentation/devicetree/bindings/iio/adc/xlnx,axi-xadc.yaml
> 

My bot found errors running 'make dt_binding_check' on your patch:

yamllint warnings/errors:

dtschema/dtc warnings/errors:
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/iio/adc/xlnx,axi-xadc.yaml: properties:xlnx,channels:type: 'boolean' was expected
	hint: A vendor boolean property can use "type: boolean"
	from schema $id: http://devicetree.org/meta-schemas/vendor-props.yaml

doc reference errors (make refcheckdocs):

See https://patchwork.kernel.org/project/devicetree/patch/20260323074505.3853353-5-sai.krishna.potthuri@amd.com

The base for the series is generally the latest rc1. A different dependency
should be noted in *this* patch.

If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:

pip3 install dtschema --upgrade

Please check and re-submit after running the above command yourself. Note
that DT_SCHEMA_FILES can be set to your schema file to speed up checking
your schema. However, it must be unset to test all examples with your schema.