[PATCH net-next v4 1/2] arm64: dts: ti: k3-am642-evm: Add ICSSG0 overlay for dual EMAC support
Meghana Malladi
m-malladi at ti.com
Mon Mar 23 02:03:57 PDT 2026
Add device tree overlay to enable ICSSG0 dual EMAC support on AM642 EVM.
This overlay enables both ICSSG0 Ethernet interfaces (port0 and port1) in
dual EMAC mode.
Users can combine this with the existing ICSSG1 overlay to enable all four
ICSSG interfaces if needed.
Signed-off-by: Meghana Malladi <m-malladi at ti.com>
---
v4-v3:
- Change the ASEL value in main_pktdma property from 0 to 15
as pointed out by Vignesh Raghavendra <vigneshr at ti.com>
arch/arm64/boot/dts/ti/Makefile | 4 +
.../boot/dts/ti/k3-am642-evm-icssg0.dtso | 168 ++++++++++++++++++
2 files changed, 172 insertions(+)
create mode 100644 arch/arm64/boot/dts/ti/k3-am642-evm-icssg0.dtso
diff --git a/arch/arm64/boot/dts/ti/Makefile b/arch/arm64/boot/dts/ti/Makefile
index ba01a929e06f..d2cd124a5b08 100644
--- a/arch/arm64/boot/dts/ti/Makefile
+++ b/arch/arm64/boot/dts/ti/Makefile
@@ -62,6 +62,7 @@ dtb-$(CONFIG_ARCH_K3) += k3-am62x-sk-hdmi-audio.dtbo
# Boards with AM64x SoC
dtb-$(CONFIG_ARCH_K3) += k3-am642-evm.dtb
+dtb-$(CONFIG_ARCH_K3) += k3-am642-evm-icssg0.dtbo
dtb-$(CONFIG_ARCH_K3) += k3-am642-evm-icssg1-dualemac.dtbo
dtb-$(CONFIG_ARCH_K3) += k3-am642-evm-icssg1-dualemac-mii.dtbo
dtb-$(CONFIG_ARCH_K3) += k3-am642-evm-pcie0-ep.dtbo
@@ -218,6 +219,8 @@ k3-am62p5-sk-csi2-ov5640-dtbs := k3-am62p5-sk.dtb \
k3-am62x-sk-csi2-ov5640.dtbo
k3-am62p5-sk-csi2-tevi-ov5640-dtbs := k3-am62p5-sk.dtb \
k3-am62x-sk-csi2-tevi-ov5640.dtbo
+k3-am642-evm-icssg0-dtbs := \
+ k3-am642-evm.dtb k3-am642-evm-icssg0.dtbo
k3-am642-evm-icssg1-dualemac-dtbs := \
k3-am642-evm.dtb k3-am642-evm-icssg1-dualemac.dtbo
k3-am642-evm-icssg1-dualemac-mii-dtbs := \
@@ -306,6 +309,7 @@ dtb- += k3-am625-beagleplay-csi2-ov5640.dtb \
k3-am62p5-sk-csi2-imx219.dtb \
k3-am62p5-sk-csi2-ov5640.dtb \
k3-am62p5-sk-csi2-tevi-ov5640.dtb \
+ k3-am642-evm-icssg0.dtb \
k3-am642-evm-icssg1-dualemac.dtb \
k3-am642-evm-icssg1-dualemac-mii.dtb \
k3-am642-evm-pcie0-ep.dtb \
diff --git a/arch/arm64/boot/dts/ti/k3-am642-evm-icssg0.dtso b/arch/arm64/boot/dts/ti/k3-am642-evm-icssg0.dtso
new file mode 100644
index 000000000000..0c8e245e526c
--- /dev/null
+++ b/arch/arm64/boot/dts/ti/k3-am642-evm-icssg0.dtso
@@ -0,0 +1,168 @@
+// SPDX-License-Identifier: GPL-2.0-only OR MIT
+/**
+ * DT overlay for enabling ICSSG0 dual EMAC on AM642 EVM
+ *
+ * AM642 EVM Product link: https://www.ti.com/tool/TMDS64EVM
+ * DP83TG720 daughter card link: https://www.ti.com/tool/DP83TG720-IND-SPE-EVM
+ *
+ * Copyright (C) 2020-2026 Texas Instruments Incorporated - https://www.ti.com/
+ */
+
+/dts-v1/;
+/plugin/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include "k3-pinctrl.h"
+
+&{/} {
+ icssg0_eth: icssg0-eth {
+ compatible = "ti,am642-icssg-prueth";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pru_icssg0_rgmii1_pins_default>, <&pru_icssg0_rgmii2_pins_default>;
+ sram = <&oc_sram>;
+
+ dmas = <&main_pktdma 0xc100 15>, /* egress slice 0 */
+ <&main_pktdma 0xc101 15>, /* egress slice 0 */
+ <&main_pktdma 0xc102 15>, /* egress slice 0 */
+ <&main_pktdma 0xc103 15>, /* egress slice 0 */
+ <&main_pktdma 0xc104 15>, /* egress slice 1 */
+ <&main_pktdma 0xc105 15>, /* egress slice 1 */
+ <&main_pktdma 0xc106 15>, /* egress slice 1 */
+ <&main_pktdma 0xc107 15>, /* egress slice 1 */
+ <&main_pktdma 0x4100 15>, /* ingress slice 0 */
+ <&main_pktdma 0x4101 15>; /* ingress slice 1 */
+ dma-names = "tx0-0", "tx0-1", "tx0-2", "tx0-3",
+ "tx1-0", "tx1-1", "tx1-2", "tx1-3",
+ "rx0", "rx1";
+
+ interrupt-parent = <&icssg0_intc>;
+ interrupts = <24 0 2>, <25 1 3>;
+ interrupt-names = "tx_ts0", "tx_ts1";
+
+ ti,prus = <&pru0_0>, <&rtu0_0>, <&tx_pru0_0>, <&pru0_1>, <&rtu0_1>, <&tx_pru0_1>;
+ firmware-name = "ti-pruss/am64x-sr2-pru0-prueth-fw.elf",
+ "ti-pruss/am64x-sr2-rtu0-prueth-fw.elf",
+ "ti-pruss/am64x-sr2-txpru0-prueth-fw.elf",
+ "ti-pruss/am64x-sr2-pru1-prueth-fw.elf",
+ "ti-pruss/am64x-sr2-rtu1-prueth-fw.elf",
+ "ti-pruss/am64x-sr2-txpru1-prueth-fw.elf";
+
+ ti,pruss-gp-mux-sel = <2>, /* MII mode */
+ <2>,
+ <2>,
+ <2>, /* MII mode */
+ <2>,
+ <2>;
+
+ ti,mii-g-rt = <&icssg0_mii_g_rt>;
+ ti,mii-rt = <&icssg0_mii_rt>;
+ ti,iep = <&icssg0_iep0>, <&icssg0_iep1>;
+ ti,pa-stats = <&icssg0_pa_stats>;
+
+ ethernet-ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ icssg0_emac0: port at 0 {
+ reg = <0>;
+ phy-handle = <&icssg0_phy00>;
+ phy-mode = "rgmii-id";
+ ti,syscon-rgmii-delay = <&main_conf 0x4100>;
+ /* Filled in by bootloader */
+ local-mac-address = [00 00 00 00 00 00];
+ };
+
+ icssg0_emac1: port at 1 {
+ reg = <1>;
+ phy-handle = <&icssg0_phy01>;
+ phy-mode = "rgmii-id";
+ ti,syscon-rgmii-delay = <&main_conf 0x4104>;
+ /* Filled in by bootloader */
+ local-mac-address = [00 00 00 00 00 00];
+ };
+ };
+ };
+};
+
+&main_pmx0 {
+ pru_icssg0_mdio_pins_default: pru-icssg0-mdio-pins {
+ pinctrl-single,pins = <
+ /* (P3) PRG0_MDIO0_MDC */
+ AM64X_IOPAD(0x0204, PIN_OUTPUT, 0)
+ /* (P2) PRG0_MDIO0_MDIO */
+ AM64X_IOPAD(0x0200, PIN_INPUT, 0)
+ /* (P16) GPIO0_32 - GPMC0_ADVn_ALE - GPIO_ETH0/1_RESETn# */
+ AM64X_IOPAD(0x0084, PIN_OUTPUT, 7)
+ >;
+ };
+
+ pru_icssg0_rgmii1_pins_default: pru-icssg0-rgmii1-pins {
+ pinctrl-single,pins = <
+ AM64X_IOPAD(0x0160, PIN_INPUT, 2) /* (Y1) PRG0_PRU0_GPO0.PRG0_RGMII1_RD0 */
+ AM64X_IOPAD(0x0164, PIN_INPUT, 2) /* (R4) PRG0_PRU0_GPO1.PRG0_RGMII1_RD1 */
+ AM64X_IOPAD(0x0168, PIN_INPUT, 2) /* (U2) PRG0_PRU0_GPO2.PRG0_RGMII1_RD2 */
+ AM64X_IOPAD(0x016c, PIN_INPUT, 2) /* (V2) PRG0_PRU0_GPO3.PRG0_RGMII1_RD3 */
+ AM64X_IOPAD(0x0178, PIN_INPUT, 2) /* (T3) PRG0_PRU0_GPO6.PRG0_RGMII1_RXC */
+ AM64X_IOPAD(0x0170, PIN_INPUT, 2) /* (AA2) PRG0_PRU0_GPO4.PRG0_RGMII1_RX_CTL */
+ AM64X_IOPAD(0x018c, PIN_OUTPUT, 2) /* (Y3) PRG0_PRU0_GPO11.PRG0_RGMII1_TD0 */
+ AM64X_IOPAD(0x0190, PIN_OUTPUT, 2) /* (AA3) PRG0_PRU0_GPO12.PRG0_RGMII1_TD1 */
+ AM64X_IOPAD(0x0194, PIN_OUTPUT, 2) /* (R6) PRG0_PRU0_GPO13.PRG0_RGMII1_TD2 */
+ AM64X_IOPAD(0x0198, PIN_OUTPUT, 2) /* (V4) PRG0_PRU0_GPO14.PRG0_RGMII1_TD3 */
+ AM64X_IOPAD(0x01a0, PIN_OUTPUT, 2) /* (U4) PRG0_PRU0_GPO16.PRG0_RGMII1_TXC */
+ AM64X_IOPAD(0x019c, PIN_OUTPUT, 2) /* (T5) PRG0_PRU0_GPO15.PRG0_RGMII1_TX_CTL */
+ >;
+ };
+
+ pru_icssg0_rgmii2_pins_default: pru-icssg0-rgmii2-pins {
+ pinctrl-single,pins = <
+ AM64X_IOPAD(0x01b0, PIN_INPUT, 2) /* (Y2) PRG0_PRU1_GPO0.PRG0_RGMII2_RD0 */
+ AM64X_IOPAD(0x01b4, PIN_INPUT, 2) /* (W2) PRG0_PRU1_GPO1.PRG0_RGMII2_RD1 */
+ AM64X_IOPAD(0x01b8, PIN_INPUT, 2) /* (V3) PRG0_PRU1_GPO2.PRG0_RGMII2_RD2 */
+ AM64X_IOPAD(0x01bc, PIN_INPUT, 2) /* (T4) PRG0_PRU1_GPO3.PRG0_RGMII2_RD3 */
+ AM64X_IOPAD(0x01c8, PIN_INPUT, 2) /* (R5) PRG0_PRU1_GPO6.PRG0_RGMII2_RXC */
+ AM64X_IOPAD(0x01c0, PIN_INPUT, 2) /* (W3) PRG0_PRU1_GPO4.PRG0_RGMII2_RX_CTL */
+ AM64X_IOPAD(0x01dc, PIN_OUTPUT, 2) /* (W4) PRG0_PRU1_GPO11.PRG0_RGMII2_TD0 */
+ AM64X_IOPAD(0x01e0, PIN_OUTPUT, 2) /* (Y4) PRG0_PRU1_GPO12.PRG0_RGMII2_TD1 */
+ AM64X_IOPAD(0x01e4, PIN_OUTPUT, 2) /* (T6) PRG0_PRU1_GPO13.PRG0_RGMII2_TD2 */
+ AM64X_IOPAD(0x01e8, PIN_OUTPUT, 2) /* (U6) PRG0_PRU1_GPO14.PRG0_RGMII2_TD3 */
+ AM64X_IOPAD(0x01f0, PIN_OUTPUT, 2) /* (AA4) PRG0_PRU1_GPO16.PRG0_RGMII2_TXC */
+ AM64X_IOPAD(0x01ec, PIN_OUTPUT, 2) /* (U5) PRG0_PRU1_GPO15.PRG0_RGMII2_TX_CTL */
+ >;
+ };
+
+ icssg0_iep0_pins_default: icssg0-iep0-pins {
+ pinctrl-single,pins = <
+ AM64X_IOPAD(0x01ac, PIN_OUTPUT, 2) /* (W1) PRG0_PRU0_GPO19.PRG0_IEP0_EDC_SYNC_OUT0 */
+ >;
+ };
+};
+
+&icssg0_mdio {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pru_icssg0_mdio_pins_default>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ icssg0_phy00: ethernet-phy at 0 {
+ reg = <0x0>;
+ };
+
+ icssg0_phy01: ethernet-phy at a {
+ reg = <0xa>;
+ };
+};
+
+&icssg0_iep0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&icssg0_iep0_pins_default>;
+};
+
+&main_gpio0 {
+ phy-line-hog {
+ gpio-hog;
+ gpios = <32 GPIO_ACTIVE_HIGH>;
+ output-high;
+ line-name = "phy-hog-line";
+ };
+};
--
2.43.0
More information about the linux-arm-kernel
mailing list