i.MX8MP: Fix HDMI LCDIF FIFO underruns

[Marco Felsch]

On 26-03-20, Marek Vasut wrote:
> On 3/19/26 12:45 PM, Krzysztof Hałasa wrote:
> > Running (and terminating) Weston on i.MX8MP sometimes produced black
> > or grey screens. The LCDIF3 INT_STATUS_D0 register showed a FIFO underrun:
> > 
> > 32FC6024: 1000002
> > 
> > The PANIC0_THRES register was set to:
> > 
> > 32FC6238:  AA0154
> > 
> > which apparently meant low = 2736 bytes (0xAA * 16 + 16), high = 5456 bytes
> > (0x154 * 16 + 16).
> > 
> > With this patch (based on NXP's driver) the watermarks are only 16 bytes
> > higher (register values increased by 1) and the underruns are gone.
> > 
> > Tested on Solidrun Hummingboard Mate with a 1080p60 HDMI display.
> > 
> > Signed-off-by: Krzysztof Hałasa <khalasa at piap.pl>
> > 
> > --- a/drivers/gpu/drm/mxsfb/lcdif_kms.c
> > +++ b/drivers/gpu/drm/mxsfb/lcdif_kms.c
> > @@ -353,8 +353,8 @@ static void lcdif_enable_controller(struct lcdif_drm_private *lcdif)
> >   	u32 reg;
> >   	/* Set FIFO Panic watermarks, low 1/3, high 2/3 . */
> > -	writel(FIELD_PREP(PANIC0_THRES_LOW_MASK, 1 * PANIC0_THRES_MAX / 3) |
> > -	       FIELD_PREP(PANIC0_THRES_HIGH_MASK, 2 * PANIC0_THRES_MAX / 3),
> > +	writel(FIELD_PREP(PANIC0_THRES_LOW_MASK, DIV_ROUND_UP(1 * PANIC0_THRES_MAX, 3)) |
> > +	       FIELD_PREP(PANIC0_THRES_HIGH_MASK, DIV_ROUND_UP(2 * PANIC0_THRES_MAX, 3)),
> 
> I am starting to wonder, whether this should be configurable in DT, because
> it seems there might be users that need to tweak the watermarks one way or
> the other for different video outputs ?

+1 to provide a override mechanism via DT.

Regards,
  Marco

> 
> +CC Liu
> 
> 

-- 
#gernperDu 
#CallMeByMyFirstName

Pengutronix e.K.                           |                             |
Steuerwalder Str. 21                       | https://www.pengutronix.de/ |
31137 Hildesheim, Germany                  | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-9    |