[PATCH net-next 0/8] net: stmmac: improve PCS support

[Konrad Dybcio]

On 3/19/26 10:24 AM, Russell King (Oracle) wrote:
> On Thu, Mar 19, 2026 at 12:35:58AM +0000, Russell King (Oracle) wrote:
>> On Thu, Mar 19, 2026 at 03:42:05AM +0530, Mohd Ayaan Anwar wrote:
>>> [    8.650486] qcom-ethqos 23040000.ethernet: clk_csr value out of range (0xffffff00 exceeds mask 0x00000f00), truncating
>>
>> Please look into this first - with the MDIO bus operating at
>> who-knows-what frequency, this could make reading from the PHY
>> unreliable.
> 
> My guess is clk_get_rate(priv->plat->stmmac_clk) is returning zero,
> which means we don't know the rate of the CSR clock.
> 
> From what I can see in drivers/clk/qcom/gcc-qcs404.c and
> drivers/clk/qcom/gcc-sdx55.c, this looks like this case - the
> struct clk_branch makes no mention of any clock rate, nor does it
> have any parent. From what I can see, neither of these drivers
> specify any rates for any of their clocks, which likely means that
> clk_get_rate() will be zero for all of them.
> 
> Sadly, when I designed the clk API, I didn't think that people would
> be stupid enough not to implement the API properly, more fool me.
> 
> Under the old code, we would've used STMMAC_CSR_20_35M, which means
> we're assuming that the CSR clock is between 20 and 35MHz, even
> though the value is zero. Is that the case? If it's higher than
> 35MHz, then you've been operating the MDIO bus out of IEEE 802.3
> specification, which can make PHY access unrealible.
> 
> In any case, please fix your clock drivers.

I'm not 100% sure the currently-passed AXI clock is what we want
there and the docs aren't super helpful.. is there a synopsys-name
for it? What rates would you expect it to run at?

Konrad