[PATCH 1/5] dt-bindings: can: fsl,flexcan: add NXP S32N79 SoC support

[Marc Kleine-Budde]

On 18.03.2026 10:22:11, Ciprian Costea wrote:
> From: Ciprian Marian Costea <ciprianmarian.costea at oss.nxp.com>
>
> Add NXP S32N79 SoC compatible string and interrupt properties.
>
> On S32N79, FlexCAN IP is integrated with two interrupt lines:
> one for the mailbox interrupts (0-127) and one for signaling
> errors and bus state changes.

Comment from patch#2 applies here, too:

Usually it's "bus error" and "state changes", as the errors happen
visible for everyone on the bus, while the state change is local to the
controller (every controller has it's own state).

> Co-developed-by: Andra-Teodora Ilie <andra.ilie at nxp.com>
> Signed-off-by: Andra-Teodora Ilie <andra.ilie at nxp.com>
> Co-developed-by: Larisa Grigore <larisa.grigore at nxp.com>
> Signed-off-by: Larisa Grigore <larisa.grigore at nxp.com>
> Signed-off-by: Ciprian Marian Costea <ciprianmarian.costea at oss.nxp.com>
> ---
>  .../bindings/net/can/fsl,flexcan.yaml         | 30 ++++++++++++++++++-
>  1 file changed, 29 insertions(+), 1 deletion(-)
>
> diff --git a/Documentation/devicetree/bindings/net/can/fsl,flexcan.yaml b/Documentation/devicetree/bindings/net/can/fsl,flexcan.yaml
> index f81d56f7c12a..131fae2739fa 100644
> --- a/Documentation/devicetree/bindings/net/can/fsl,flexcan.yaml
> +++ b/Documentation/devicetree/bindings/net/can/fsl,flexcan.yaml
> @@ -26,6 +26,7 @@ properties:
>            - fsl,ls1021ar2-flexcan
>            - fsl,lx2160ar1-flexcan
>            - nxp,s32g2-flexcan
> +          - nxp,s32n79-flexcan
>        - items:
>            - enum:
>                - fsl,imx53-flexcan
> @@ -173,11 +174,38 @@ allOf:
>              - const: mb-1
>        required:
>          - interrupt-names
> -    else:
> +  - if:
> +      properties:
> +        compatible:
> +          contains:
> +            const: nxp,s32n79-flexcan
> +    then:
> +      properties:
> +        interrupts:
> +          items:
> +            - description: Message Buffer interrupt for mailboxes 0-127
> +            - description: Bus Error interrupt

It's a combined Device state change and Bus Error detection interrupt?

> +        interrupt-names:
> +          items:
> +            - const: mb-0
> +            - const: berr
> +      required:
> +        - interrupt-names
> +
> +  - if:
> +      not:
> +        properties:
> +          compatible:
> +            contains:
> +              enum:
> +                - nxp,s32g2-flexcan
> +                - nxp,s32n79-flexcan

Is there else if or something like that in YAML?

> +    then:
>        properties:
>          interrupts:
>            maxItems: 1
>          interrupt-names: false
> +
>    - if:
>        required:
>          - xceiver-supply
> --
> 2.43.0
>
>
>

regards,
Marc

--
Pengutronix e.K.                 | Marc Kleine-Budde          |
Embedded Linux                   | https://www.pengutronix.de |
Vertretung Nürnberg              | Phone: +49-5121-206917-129 |
Amtsgericht Hildesheim, HRA 2686 | Fax:   +49-5121-206917-9   |
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 228 bytes
Desc: not available
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20260318/79917747/attachment.sig>