[PATCH 1/1] gpio: mxc: map Both Edge pad wakeup to Rising Edge

[Shenwei Wang]

Suspend may fail on i.MX8QM when Falling Edge is used as a pad wakeup
trigger due to a hardware bug in the detection logic. Since the hardware
does not support Both Edge wakeup, remap requests for Both Edge to Rising
Edge by default to avoid hitting this issue.

Fixes: f60c9eac54af ("gpio: mxc: enable pad wakeup on i.MX8x platforms")
cc: stable at vger.kernel.org
Signed-off-by: Shenwei Wang <shenwei.wang at nxp.com>
---
 drivers/gpio/gpio-mxc.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/gpio/gpio-mxc.c b/drivers/gpio/gpio-mxc.c
index d7666fe9dbf8..f8300690ac05 100644
--- a/drivers/gpio/gpio-mxc.c
+++ b/drivers/gpio/gpio-mxc.c
@@ -589,7 +589,7 @@ static bool mxc_gpio_set_pad_wakeup(struct mxc_gpio_port *port, bool enable)
 		IMX_SCU_WAKEUP_OFF,		/* 0 */
 		IMX_SCU_WAKEUP_RISE_EDGE,	/* IRQ_TYPE_EDGE_RISING */
 		IMX_SCU_WAKEUP_FALL_EDGE,	/* IRQ_TYPE_EDGE_FALLING */
-		IMX_SCU_WAKEUP_FALL_EDGE,	/* IRQ_TYPE_EDGE_BOTH */
+		IMX_SCU_WAKEUP_RISE_EDGE,	/* IRQ_TYPE_EDGE_BOTH */
 		IMX_SCU_WAKEUP_HIGH_LVL,	/* IRQ_TYPE_LEVEL_HIGH */
 		IMX_SCU_WAKEUP_OFF,		/* 5 */
 		IMX_SCU_WAKEUP_OFF,		/* 6 */
-- 
2.43.0