[PATCH v2 3/3] arm64: dts: nuvoton: Add I2C nodes for MA35D1 SoC

[Zi-Yu Chen]

Add I2C controller nodes to the MA35D1 SoC dtsi.
Also enable the I2C interfaces on the MA35D1 SOM board
to allow communication with onboard peripherals.

Signed-off-by: Zi-Yu Chen <zychennvt at gmail.com>
---
 .../boot/dts/nuvoton/ma35d1-som-256m.dts      | 18 +++++-
 arch/arm64/boot/dts/nuvoton/ma35d1.dtsi       | 60 +++++++++++++++++++
 2 files changed, 77 insertions(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/nuvoton/ma35d1-som-256m.dts b/arch/arm64/boot/dts/nuvoton/ma35d1-som-256m.dts
index f6f20a17e501..4dfb5340a139 100644
--- a/arch/arm64/boot/dts/nuvoton/ma35d1-som-256m.dts
+++ b/arch/arm64/boot/dts/nuvoton/ma35d1-som-256m.dts
@@ -13,6 +13,7 @@ / {
 	compatible = "nuvoton,ma35d1-som", "nuvoton,ma35d1";
 
 	aliases {
+		i2c0 = &i2c2;
 		serial0 = &uart0;
 		serial11 = &uart11;
 		serial12 = &uart12;
@@ -55,6 +56,12 @@ &clk {
 			   "integer";
 };
 
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+};
+
 &pinctrl {
 	uart-grp {
 		pinctrl_uart0: uart0-pins {
@@ -98,6 +105,15 @@ pinctrl_uart16: uart16-pins {
 			power-source = <1>;
 		};
 	};
+	
+	i2c-grp {
+		pinctrl_i2c1: i2c1-pins {
+			nuvoton,pins = <1 10 12>,
+				       <1 11 12>;
+			bias-disable;
+		};
+
+	};
 };
 
 &uart0 {
@@ -128,4 +144,4 @@ &uart16 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_uart16>;
 	status = "okay";
-};
+};
\ No newline at end of file
diff --git a/arch/arm64/boot/dts/nuvoton/ma35d1.dtsi b/arch/arm64/boot/dts/nuvoton/ma35d1.dtsi
index e51b98f5bdce..a88d1c2938e7 100644
--- a/arch/arm64/boot/dts/nuvoton/ma35d1.dtsi
+++ b/arch/arm64/boot/dts/nuvoton/ma35d1.dtsi
@@ -372,6 +372,66 @@ uart15: serial at 407f0000 {
 			status = "disabled";
 		};
 
+		i2c1: i2c at 40810000 {
+			compatible = "nuvoton,ma35d1-i2c";
+			reg = <0x0 0x40810000 0x0 0x1000>;
+			interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk I2C1_GATE>;
+			clock-frequency = <100000>;
+			resets = <&sys MA35D1_RESET_I2C1>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c2: i2c at 40820000 {
+			compatible = "nuvoton,ma35d1-i2c";
+			reg = <0x0 0x40820000 0x0 0x1000>;
+			interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk I2C2_GATE>;
+			clock-frequency = <100000>;
+			resets = <&sys MA35D1_RESET_I2C2>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c3: i2c at 40830000 {
+			compatible = "nuvoton,ma35d1-i2c";
+			reg = <0x0 0x40830000 0x0 0x1000>;
+			interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk I2C3_GATE>;
+			clock-frequency = <100000>;
+			resets = <&sys MA35D1_RESET_I2C3>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c4: i2c at 40840000 {
+			compatible = "nuvoton,ma35d1-i2c";
+			reg = <0x0 0x40840000 0x0 0x1000>;
+			interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk I2C4_GATE>;
+			clock-frequency = <100000>;
+			resets = <&sys MA35D1_RESET_I2C4>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c5: i2c at 40850000 {
+			compatible = "nuvoton,ma35d1-i2c";
+			reg = <0x0 0x40850000 0x0 0x1000>;
+			interrupts = <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk I2C5_GATE>;
+			clock-frequency = <100000>;
+			resets = <&sys MA35D1_RESET_I2C5>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
 		uart16: serial at 40880000 {
 			compatible = "nuvoton,ma35d1-uart";
 			reg = <0x0 0x40880000 0x0 0x100>;
-- 
2.34.1