[PATCH V8 06/13] arm: dts: imx6qdl: Add Root Port node and PERST property

[Manivannan Sadhasivam]

On Fri, Mar 13, 2026 at 02:08:05PM +0800, Chen-Yu Tsai wrote:
> On Fri, Mar 13, 2026 at 10:08 AM Sherry Sun <sherry.sun at nxp.com> wrote:
> >
> > Since describing the PCIe PERST# property under Host Bridge node is now
> > deprecated, it is recommended to add it to the Root Port node, so
> > creating the Root Port node and add the reset-gpios property in Root
> > Port.
> >
> > Signed-off-by: Sherry Sun <sherry.sun at nxp.com>
> > ---
> >  arch/arm/boot/dts/nxp/imx/imx6qdl-sabresd.dtsi |  5 +++++
> >  arch/arm/boot/dts/nxp/imx/imx6qdl.dtsi         | 11 +++++++++++
> >  arch/arm/boot/dts/nxp/imx/imx6qp-sabreauto.dts |  5 +++++
> >  3 files changed, 21 insertions(+)
> >
> > diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-sabresd.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-sabresd.dtsi
> > index ba29720e3f72..fe9046c03ddd 100644
> > --- a/arch/arm/boot/dts/nxp/imx/imx6qdl-sabresd.dtsi
> > +++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-sabresd.dtsi
> > @@ -754,11 +754,16 @@ lvds0_out: endpoint {
> >  &pcie {
> >         pinctrl-names = "default";
> >         pinctrl-0 = <&pinctrl_pcie>;
> > +       /* This property is deprecated, use reset-gpios from the Root Port node. */
> >         reset-gpio = <&gpio7 12 GPIO_ACTIVE_LOW>;
> 
> I'd say just remove the old description.
> 
> You're asking for trouble by describing the same thing in two different places.
> 
> >         vpcie-supply = <&reg_pcie>;
> 
> I would probably also take this chance to just convert to the proper PCI
> slot supply, and just add pwrctrl support into your PCIe driver.
> 

+1

- Mani

-- 
மணிவண்ணன் சதாசிவம்