[PATCH v5 04/10] arm64: dts: lx2160a: rename pinmux nodes for readability
Josua Mayer
josua at solid-run.com
Sat Mar 14 05:05:14 PDT 2026
LX2160A pinmux is done in groups by various length bitfields within
configuration registers.
Each group of pins is named in the reference manual after a primary
function using soc-specific naming, e.g. IIC1 (for i2c0).
Hardware block numbering starts from zero in device-tree but one in the
reference manual.
Rename the already defined pinmux nodes originally added for changing
i2c pins between i2c and gpio functions reflecting the reference manual
name (IIC) in the node name, and the device-tree name (i2c, gpio) in the
label.
This makes it more clear to future developers that these nodes do in
fact configure a group of pins, and helps with cross-referencing
documentation.
No functional change intended.
Fixes: 8a1365c7bbc1 ("arm64: dts: lx2160a: add pinmux and i2c gpio to support bus recovery")
Signed-off-by: Josua Mayer <josua at solid-run.com>
---
arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi | 64 +++++++++++++-------------
1 file changed, 32 insertions(+), 32 deletions(-)
diff --git a/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi b/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi
index 41c9b4253f4a5..28500e8873909 100644
--- a/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi
@@ -750,8 +750,8 @@ i2c0: i2c at 2000000 {
clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
QORIQ_CLK_PLL_DIV(16)>;
pinctrl-names = "default", "gpio";
- pinctrl-0 = <&i2c0_scl>;
- pinctrl-1 = <&i2c0_scl_gpio>;
+ pinctrl-0 = <&i2c0_pins>;
+ pinctrl-1 = <&gpio0_3_2_pins>;
scl-gpios = <&gpio0 3 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
status = "disabled";
};
@@ -766,8 +766,8 @@ i2c1: i2c at 2010000 {
clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
QORIQ_CLK_PLL_DIV(16)>;
pinctrl-names = "default", "gpio";
- pinctrl-0 = <&i2c1_scl>;
- pinctrl-1 = <&i2c1_scl_gpio>;
+ pinctrl-0 = <&i2c1_pins>;
+ pinctrl-1 = <&gpio0_31_30_pins>;
scl-gpios = <&gpio0 31 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
status = "disabled";
};
@@ -782,8 +782,8 @@ i2c2: i2c at 2020000 {
clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
QORIQ_CLK_PLL_DIV(16)>;
pinctrl-names = "default", "gpio";
- pinctrl-0 = <&i2c2_scl>;
- pinctrl-1 = <&i2c2_scl_gpio>;
+ pinctrl-0 = <&i2c2_pins>;
+ pinctrl-1 = <&gpio0_29_28_pins>;
scl-gpios = <&gpio0 29 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
status = "disabled";
};
@@ -798,8 +798,8 @@ i2c3: i2c at 2030000 {
clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
QORIQ_CLK_PLL_DIV(16)>;
pinctrl-names = "default", "gpio";
- pinctrl-0 = <&i2c3_scl>;
- pinctrl-1 = <&i2c3_scl_gpio>;
+ pinctrl-0 = <&i2c3_pins>;
+ pinctrl-1 = <&gpio0_27_26_pins>;
scl-gpios = <&gpio0 27 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
status = "disabled";
};
@@ -814,8 +814,8 @@ i2c4: i2c at 2040000 {
clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
QORIQ_CLK_PLL_DIV(16)>;
pinctrl-names = "default", "gpio";
- pinctrl-0 = <&i2c4_scl>;
- pinctrl-1 = <&i2c4_scl_gpio>;
+ pinctrl-0 = <&i2c4_pins>;
+ pinctrl-1 = <&gpio0_25_24_pins>;
scl-gpios = <&gpio0 25 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
status = "disabled";
};
@@ -830,8 +830,8 @@ i2c5: i2c at 2050000 {
clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
QORIQ_CLK_PLL_DIV(16)>;
pinctrl-names = "default", "gpio";
- pinctrl-0 = <&i2c5_scl>;
- pinctrl-1 = <&i2c5_scl_gpio>;
+ pinctrl-0 = <&i2c5_pins>;
+ pinctrl-1 = <&gpio0_23_22_pins>;
scl-gpios = <&gpio0 23 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
status = "disabled";
};
@@ -846,8 +846,8 @@ i2c6: i2c at 2060000 {
clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
QORIQ_CLK_PLL_DIV(16)>;
pinctrl-names = "default", "gpio";
- pinctrl-0 = <&i2c6_scl>;
- pinctrl-1 = <&i2c6_scl_gpio>;
+ pinctrl-0 = <&i2c6_i2c7_pins>;
+ pinctrl-1 = <&gpio1_18_15_pins>;
scl-gpios = <&gpio1 16 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
status = "disabled";
};
@@ -862,8 +862,8 @@ i2c7: i2c at 2070000 {
clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
QORIQ_CLK_PLL_DIV(16)>;
pinctrl-names = "default", "gpio";
- pinctrl-0 = <&i2c6_scl>;
- pinctrl-1 = <&i2c6_scl_gpio>;
+ pinctrl-0 = <&i2c6_i2c7_pins>;
+ pinctrl-1 = <&gpio1_18_15_pins>;
scl-gpios = <&gpio1 18 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
status = "disabled";
};
@@ -1713,11 +1713,11 @@ pinmux_i2crv: pinmux at 70010012c {
pinctrl-single,register-width = <32>;
pinctrl-single,function-mask = <0x7>;
- i2c1_scl: i2c1-scl-pins {
+ i2c1_pins: iic2-i2c-pins {
pinctrl-single,bits = <0x0 0 0x7>;
};
- i2c1_scl_gpio: i2c1-scl-gpio-pins {
+ gpio0_31_30_pins: iic2-gpio-pins {
pinctrl-single,bits = <0x0 0x1 0x7>;
};
@@ -1725,35 +1725,35 @@ esdhc0_cd_wp_pins: iic2-sdhc-pins {
pinctrl-single,bits = <0x0 0x6 0x7>;
};
- i2c2_scl: i2c2-scl-pins {
+ i2c2_pins: iic3-i2c-pins {
pinctrl-single,bits = <0x0 0 (0x7 << 3)>;
};
- i2c2_scl_gpio: i2c2-scl-gpio-pins {
+ gpio0_29_28_pins: iic3-gpio-pins {
pinctrl-single,bits = <0x0 (0x1 << 3) (0x7 << 3)>;
};
- i2c3_scl: i2c3-scl-pins {
+ i2c3_pins: iic4-i2c-pins {
pinctrl-single,bits = <0x0 0 (0x7 << 6)>;
};
- i2c3_scl_gpio: i2c3-scl-gpio-pins {
+ gpio0_27_26_pins: iic4-gpio-pins {
pinctrl-single,bits = <0x0 (0x1 << 6) (0x7 << 6)>;
};
- i2c4_scl: i2c4-scl-pins {
+ i2c4_pins: iic5-i2c-pins {
pinctrl-single,bits = <0x0 0 (0x7 << 9)>;
};
- i2c4_scl_gpio: i2c4-scl-gpio-pins {
+ gpio0_25_24_pins: iic5-gpio-pins {
pinctrl-single,bits = <0x0 (0x1 << 9) (0x7 << 9)>;
};
- i2c5_scl: i2c5-scl-pins {
+ i2c5_pins: iic6-i2c-pins {
pinctrl-single,bits = <0x0 0 (0x7 << 12)>;
};
- i2c5_scl_gpio: i2c5-scl-gpio-pins {
+ gpio0_23_22_pins: iic6-gpio-pins {
pinctrl-single,bits = <0x0 (0x1 << 12) (0x7 << 12)>;
};
@@ -1777,19 +1777,19 @@ gpio0_14_12_pins: sdhc1-dir-gpio-pins {
pinctrl-single,bits = <0x0 (0x1 << 27) (0x7 << 27)>;
};
- i2c6_scl: i2c6-scl-pins {
- pinctrl-single,bits = <0x4 0x2 0x7>;
+ gpio1_18_15_pins: iic8-iic7-gpio-pins {
+ pinctrl-single,bits = <0x4 0x1 0x7>;
};
- i2c6_scl_gpio: i2c6-scl-gpio-pins {
- pinctrl-single,bits = <0x4 0x1 0x7>;
+ i2c6_i2c7_pins: iic8-iic7-i2c-pins {
+ pinctrl-single,bits = <0x4 0x2 0x7>;
};
- i2c0_scl: i2c0-scl-pins {
+ i2c0_pins: iic1-i2c-pins {
pinctrl-single,bits = <0x8 0x0 (0x1 << 10)>;
};
- i2c0_scl_gpio: i2c0-scl-gpio-pins {
+ gpio0_3_2_pins: iic1-gpio-pins {
pinctrl-single,bits = <0x8 (0x1 << 10) (0x1 << 10)>;
};
};
--
2.51.0
More information about the linux-arm-kernel
mailing list