[PATCH v3 05/11] arm64: dts: freescale: imx8mm-var-som: Add MCP251xFD CAN controller

[Frank Li]

On Sat, Mar 07, 2026 at 04:54:41PM +0100, Stefano Radaelli wrote:
> From: Stefano Radaelli <stefano.r at variscite.com>
>
> From: Stefano Radaelli <stefano.r at variscite.com>
>
> Add support for the Microchip MCP251xFD CAN-FD controller connected
> to the SPI bus on the i.MX8MM VAR-SOM.
>
> The controller uses a 40 MHz external oscillator and requires an
> interrupt line and a dedicated RX interrupt GPIO.
>
> This patch adds the fixed clock, the MCP251xFD device node with the

Remove "This patch", Just said Add the fixed clock ...

Frank