[PATCH v10 3/3] arm64: dts: cix: add support for cix sky1 resets

[Peter Chen]

On 26-03-02 14:44:07, Gary Yang wrote:
> There are two reset conctrollers on Cix Sky1 Soc. One is located in S0
> domain, and the other is located in S5 domain.
> 
> Signed-off-by: Gary Yang <gary.yang at cixtech.com>

Applied, thanks.

Peter
> ---
>  arch/arm64/boot/dts/cix/sky1.dtsi | 12 ++++++++++++
>  1 file changed, 12 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/cix/sky1.dtsi b/arch/arm64/boot/dts/cix/sky1.dtsi
> index 64b76905cbff..a28b877cced2 100644
> --- a/arch/arm64/boot/dts/cix/sky1.dtsi
> +++ b/arch/arm64/boot/dts/cix/sky1.dtsi
> @@ -348,6 +348,12 @@ i3c1: i3c at 4100000 {
>  			status = "disabled";
>  		};
>  
> +		syscon: syscon at 4160000 {
> +			compatible = "cix,sky1-system-control", "syscon";
> +			reg = <0x0 0x4160000 0x0 0x100>;
> +			#reset-cells = <1>;
> +		};
> +
>  		iomuxc: pinctrl at 4170000 {
>  			compatible = "cix,sky1-pinctrl";
>  			reg = <0x0 0x04170000 0x0 0x1000>;
> @@ -568,6 +574,12 @@ ppi_partition1: interrupt-partition-1 {
>  			};
>  		};
>  
> +		s5_syscon: syscon at 16000000 {
> +			compatible = "cix,sky1-s5-system-control", "syscon";
> +			reg = <0x0 0x16000000 0x0 0x1000>;
> +			#reset-cells = <1>;
> +		};
> +
>  		iomuxc_s5: pinctrl at 16007000 {
>  			compatible = "cix,sky1-pinctrl-s5";
>  			reg = <0x0 0x16007000 0x0 0x1000>;
> -- 
> 2.49.0
> 

-- 

Best regards,
Peter