[PATCH v2] iio: adc: xilinx-xadc: Fix sequencer mode in postdisable for dual mux

[Michal Simek]

+Salih, Conall,

On 3/7/26 13:41, Jonathan Cameron wrote:
> On Wed,  4 Mar 2026 10:07:27 +0100
> Christofer Jonason <christofer.jonason at guidelinegeo.com> wrote:
> 
>> xadc_postdisable() unconditionally sets the sequencer to continuous
>> mode. For dual external multiplexer configurations this is incorrect:
>> simultaneous sampling mode is required so that ADC-A samples through
>> the mux on VAUX[0-7] while ADC-B simultaneously samples through the
>> mux on VAUX[8-15]. In continuous mode only ADC-A is active, so
>> VAUX[8-15] channels return incorrect data.
>>
>> Since postdisable is also called from xadc_probe() to set the initial
>> idle state, the wrong sequencer mode is active from the moment the
>> driver loads.
>>
>> The preenable path already uses xadc_get_seq_mode() which returns
>> SIMULTANEOUS for dual mux. Fix postdisable to do the same.
>>
>> Fixes: bdc8cda1d010 ("iio:adc: Add Xilinx XADC driver")
>> Cc: stable at vger.kernel.org
>> Signed-off-by: Christofer Jonason <christofer.jonason at guidelinegeo.com>
> 
> I'll leave this on list for a little longer as I'd really like a confirmation
> of this one from the AMD Xilinx folk.

Salih/Conall: Please look at this patch and provide your comment or tag.

Thanks,
Michal