[PATCH v2] arm64: dts: ti: k3-am62a7-sk: Fix pin name in comment from M19 to N22

[Andrew Davis]

On 3/8/26 11:55 PM, Siddharth Vadapalli wrote:
> The pin for GPMC0_CLK.GPIO0_31 at address 0x000F407C is N22 and not M19.
> Hence, fix the pin name in the comment to avoid confusion.
> 
> Fixes: 8f023012eb4a ("arm64: dts: ti: k3-am62a: Enable UHS mode support for SD cards")
> Cc: <stable at vger.kernel.org>
> Signed-off-by: Siddharth Vadapalli <s-vadapalli at ti.com>
> ---

Reviewed-by: Andrew Davis <afd at ti.com>

> 
> Base-Commit: 1f318b96cc84 Linux 7.0-rc3
> 
> v1:
> https://lore.kernel.org/r/20260212130843.1054100-1-s-vadapalli@ti.com/
> Changes since v1:
> - Corrected pin name in comment to N22 instead of updating address to match
>    the incorrect pin M19.
> 
>   arch/arm64/boot/dts/ti/k3-am62a7-sk.dts | 2 +-
>   1 file changed, 1 insertion(+), 1 deletion(-)
> 
> diff --git a/arch/arm64/boot/dts/ti/k3-am62a7-sk.dts b/arch/arm64/boot/dts/ti/k3-am62a7-sk.dts
> index e99bdbc2e0cb..b1a6f10adf26 100644
> --- a/arch/arm64/boot/dts/ti/k3-am62a7-sk.dts
> +++ b/arch/arm64/boot/dts/ti/k3-am62a7-sk.dts
> @@ -398,7 +398,7 @@ AM62AX_IOPAD(0x01d4, PIN_INPUT, 7) /* (C15) UART0_RTSn.GPIO1_23 */
>   
>   	vddshv_sdio_pins_default: vddshv-sdio-default-pins {
>   		pinctrl-single,pins = <
> -			AM62AX_IOPAD(0x07c, PIN_OUTPUT, 7) /* (M19) GPMC0_CLK.GPIO0_31 */
> +			AM62AX_IOPAD(0x07c, PIN_OUTPUT, 7) /* (N22) GPMC0_CLK.GPIO0_31 */
>   		>;
>   	};
>