[PATCH 4/6] ARM: omap1: ams-delta: convert GPIO hogs to using firmware nodes

[Kevin Hilman]

Bartosz Golaszewski <bartosz.golaszewski at oss.qualcomm.com> writes:

> Setup a software node hierarchy for the latch2 GPIO controller defining
> the required hog and stop using legacy machine hog API.
>
> Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski at oss.qualcomm.com>

Acked-by: Kevin Hilman <khilman at baylibre.com>

> ---
>  arch/arm/mach-omap1/board-ams-delta.c | 32 +++++++++++++++++++++++++++-----
>  1 file changed, 27 insertions(+), 5 deletions(-)
>
> diff --git a/arch/arm/mach-omap1/board-ams-delta.c b/arch/arm/mach-omap1/board-ams-delta.c
> index 16392720296cd224732450c85419c35bbab506f6..1bec4fa0bd5e8bfc58103d1f24b22176707fd26f 100644
> --- a/arch/arm/mach-omap1/board-ams-delta.c
> +++ b/arch/arm/mach-omap1/board-ams-delta.c
> @@ -556,10 +556,30 @@ static struct gpiod_lookup_table *ams_delta_gpio_tables[] __initdata = {
>  	&ams_delta_nand_gpio_table,
>  };
>  
> -static struct gpiod_hog ams_delta_gpio_hogs[] = {
> -	GPIO_HOG(LATCH2_LABEL, LATCH2_PIN_KEYBRD_DATAOUT, "keybrd_dataout",
> -		 GPIO_ACTIVE_HIGH, GPIOD_OUT_LOW),
> -	{},
> +static const struct software_node latch2_gpio_swnode = {
> +	.name = LATCH2_LABEL,
> +};
> +
> +static const u32 latch2_hog_gpios[] = { LATCH2_PIN_KEYBRD_DATAOUT, 0 };
> +
> +static const struct property_entry latch2_gpio_hog_props[] = {
> +	PROPERTY_ENTRY_BOOL("gpio-hog"),
> +	PROPERTY_ENTRY_U32_ARRAY("gpios", latch2_hog_gpios),
> +	PROPERTY_ENTRY_STRING("line-name", "keybrd_dataout"),
> +	PROPERTY_ENTRY_BOOL("output-low"),
> +	{ }
> +};
> +
> +static const struct software_node latch2_gpio_hog_swnode = {
> +	.parent = &latch2_gpio_swnode,
> +	.name = "latch2-hog",
> +	.properties = latch2_gpio_hog_props,
> +};
> +
> +static const struct software_node *const latch2_gpio_swnodes[] = {
> +	&latch2_gpio_swnode,
> +	&latch2_gpio_hog_swnode,
> +	NULL
>  };
>  
>  static struct plat_serial8250_port ams_delta_modem_ports[];
> @@ -684,7 +704,6 @@ static void __init ams_delta_init(void)
>  
>  	omap_gpio_deps_init();
>  	ams_delta_latch2_init();
> -	gpiod_add_hogs(ams_delta_gpio_hogs);
>  
>  	omap_serial_init();
>  	omap_register_i2c_bus(1, 100, NULL, 0);
> @@ -693,6 +712,9 @@ static void __init ams_delta_init(void)
>  	platform_add_devices(ams_delta_devices, ARRAY_SIZE(ams_delta_devices));
>  
>  	platform_device_register_full(&latch1_gpio_devinfo);
> +
> +	software_node_register_node_group(latch2_gpio_swnodes);
> +	latch2_gpio_devinfo.fwnode = software_node_fwnode(&latch2_gpio_swnode);
>  	platform_device_register_full(&latch2_gpio_devinfo);
>  
>  	/*
>
> -- 
> 2.47.3