[PATCH 1/2] arm64: dts: tqma9352-mba93xx*: Fix Ethernet PHY IRQ support

[Alexander Stein]

Ethernet PHY interrupt mode is level triggered. Adjust the mode
accordingly.

Signed-off-by: Alexander Stein <alexander.stein at ew.tq-group.com>
---
 arch/arm64/boot/dts/freescale/imx93-tqma9352-mba93xxca.dts | 4 ++--
 arch/arm64/boot/dts/freescale/imx93-tqma9352-mba93xxla.dts | 4 ++--
 2 files changed, 4 insertions(+), 4 deletions(-)

diff --git a/arch/arm64/boot/dts/freescale/imx93-tqma9352-mba93xxca.dts b/arch/arm64/boot/dts/freescale/imx93-tqma9352-mba93xxca.dts
index 4760d07ea24b5..9108181e6592b 100644
--- a/arch/arm64/boot/dts/freescale/imx93-tqma9352-mba93xxca.dts
+++ b/arch/arm64/boot/dts/freescale/imx93-tqma9352-mba93xxca.dts
@@ -242,7 +242,7 @@ ethphy_eqos: ethernet-phy at 0 {
 			reset-assert-us = <500000>;
 			reset-deassert-us = <50000>;
 			interrupt-parent = <&gpio3>;
-			interrupts = <26 IRQ_TYPE_EDGE_FALLING>;
+			interrupts = <26 IRQ_TYPE_LEVEL_LOW>;
 			enet-phy-lane-no-swap;
 			ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_25_NS>;
 			ti,tx-internal-delay = <DP83867_RGMIIDCTL_2_25_NS>;
@@ -275,7 +275,7 @@ ethphy_fec: ethernet-phy at 0 {
 			reset-assert-us = <500000>;
 			reset-deassert-us = <50000>;
 			interrupt-parent = <&gpio3>;
-			interrupts = <27 IRQ_TYPE_EDGE_FALLING>;
+			interrupts = <27 IRQ_TYPE_LEVEL_LOW>;
 			enet-phy-lane-no-swap;
 			ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_25_NS>;
 			ti,tx-internal-delay = <DP83867_RGMIIDCTL_2_25_NS>;
diff --git a/arch/arm64/boot/dts/freescale/imx93-tqma9352-mba93xxla.dts b/arch/arm64/boot/dts/freescale/imx93-tqma9352-mba93xxla.dts
index 8a88c98ac05a7..a78bbc46c59b2 100644
--- a/arch/arm64/boot/dts/freescale/imx93-tqma9352-mba93xxla.dts
+++ b/arch/arm64/boot/dts/freescale/imx93-tqma9352-mba93xxla.dts
@@ -172,7 +172,7 @@ ethphy_eqos: ethernet-phy at 0 {
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_eqos_phy>;
 			interrupt-parent = <&gpio3>;
-			interrupts = <26 IRQ_TYPE_EDGE_FALLING>;
+			interrupts = <26 IRQ_TYPE_LEVEL_LOW>;
 			reset-gpios = <&expander1 0 GPIO_ACTIVE_LOW>;
 			reset-assert-us = <500000>;
 			reset-deassert-us = <50000>;
@@ -205,7 +205,7 @@ ethphy_fec: ethernet-phy at 0 {
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_fec_phy>;
 			interrupt-parent = <&gpio3>;
-			interrupts = <27 IRQ_TYPE_EDGE_FALLING>;
+			interrupts = <27 IRQ_TYPE_LEVEL_LOW>;
 			reset-gpios = <&expander1 1 GPIO_ACTIVE_LOW>;
 			reset-assert-us = <500000>;
 			reset-deassert-us = <50000>;
-- 
2.43.0