[PATCH v2 2/2] clk: rockchip: rk3588: Allow VP2 the same sourcing options as other VPs

[Heiko Stuebner]

From: Heiko Stuebner <heiko.stuebner at cherry.de>

Right now dclk_vop2_src is not allowed to change its parent, while
the other two dclks are allowed to do this.

All three VPs can drive non-static outputs (HDMI, DP, eDP) and even the
eDP can also support full DP connections (though no DP+).

Therefore remove the CLK_SET_RATE_NO_REPARENT flag, to allow VP2 the same
flexibility in aquiring its clock rate.

Tested-by: Quentin Schulz <quentin.schulz at cherry.de> # RK3588 Tiger w/ DP
Signed-off-by: Heiko Stuebner <heiko.stuebner at cherry.de>
---
 drivers/clk/rockchip/clk-rk3588.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/clk/rockchip/clk-rk3588.c b/drivers/clk/rockchip/clk-rk3588.c
index bea2deed0e23..cf83242d1726 100644
--- a/drivers/clk/rockchip/clk-rk3588.c
+++ b/drivers/clk/rockchip/clk-rk3588.c
@@ -2094,7 +2094,7 @@ static struct rockchip_clk_branch rk3588_early_clk_branches[] __initdata = {
 	COMPOSITE(DCLK_VOP1_SRC, "dclk_vop1_src", gpll_cpll_v0pll_aupll_p, 0,
 			RK3588_CLKSEL_CON(111), 14, 2, MFLAGS, 9, 5, DFLAGS,
 			RK3588_CLKGATE_CON(52), 11, GFLAGS),
-	COMPOSITE(DCLK_VOP2_SRC, "dclk_vop2_src", gpll_cpll_v0pll_aupll_p, CLK_SET_RATE_NO_REPARENT,
+	COMPOSITE(DCLK_VOP2_SRC, "dclk_vop2_src", gpll_cpll_v0pll_aupll_p, 0,
 			RK3588_CLKSEL_CON(112), 5, 2, MFLAGS, 0, 5, DFLAGS,
 			RK3588_CLKGATE_CON(52), 12, GFLAGS),
 	COMPOSITE_NODIV(DCLK_VOP0, "dclk_vop0", dclk_vop0_p,
-- 
2.47.3