[PATCH] USB: pxa27x_udc: check return value of clk_enable

[Zhaoyang Yu]

clk_enable() may fail according to the API contract.
Previously, udc_enable() ignored its return value.
This patch checks the return value and logs an error
without continuing initialization if clk_enable fails.

Signed-off-by: Zhaoyang Yu <2426767509 at qq.com>
---
 drivers/usb/gadget/udc/pxa27x_udc.c | 8 +++++++-
 1 file changed, 7 insertions(+), 1 deletion(-)

diff --git a/drivers/usb/gadget/udc/pxa27x_udc.c b/drivers/usb/gadget/udc/pxa27x_udc.c
index 897f53601b5b..006d6d0a5f9a 100644
--- a/drivers/usb/gadget/udc/pxa27x_udc.c
+++ b/drivers/usb/gadget/udc/pxa27x_udc.c
@@ -1693,10 +1693,16 @@ static void udc_init_data(struct pxa_udc *dev)
  */
 static void udc_enable(struct pxa_udc *udc)
 {
+	int ret;
+
 	if (udc->enabled)
 		return;
 
-	clk_enable(udc->clk);
+	ret = clk_enable(udc->clk);
+	if (ret) {
+		dev_err(udc->dev, "clk_enable failed: %d\n", ret);
+		return;
+	}
 	udc_writel(udc, UDCICR0, 0);
 	udc_writel(udc, UDCICR1, 0);
 	udc_clear_mask_UDCCR(udc, UDCCR_UDE);
-- 
2.34.1