[PATCH] arm64: dts: ti: k3-am62a7-sk: Add bootph-all property in cpsw_mac_syscon node

[Chintan Vankar]

Hello Andrew,

On 26/06/26 02:18, Andrew Davis wrote:
> On 6/25/26 6:32 AM, Chintan Vankar wrote:
>> Ethernet boot requires CPSW node to be present starting from R5 SPL 
>> stage.
>> Add "bootph-all" property in CPSW MAC's eFuse node "cpsw_mac_syscon" to
>> enable this node during SPL stage along with later boot stage so that 
>> CPSW
>> port will get static MAC address.
>>
>> Signed-off-by: Chintan Vankar <c-vankar at ti.com>
>> ---
>>
>> Hello All,
>>
>> This patch is based on linux-next tagged next-20260623.
>>
>>   arch/arm64/boot/dts/ti/k3-am62a7-sk.dts | 4 ++++
>>   1 file changed, 4 insertions(+)
>>
>> diff --git a/arch/arm64/boot/dts/ti/k3-am62a7-sk.dts b/arch/arm64/ 
>> boot/dts/ti/k3-am62a7-sk.dts
>> index 821a9705bb7d..d3b3675e7a8f 100644
>> --- a/arch/arm64/boot/dts/ti/k3-am62a7-sk.dts
>> +++ b/arch/arm64/boot/dts/ti/k3-am62a7-sk.dts
>> @@ -230,6 +230,10 @@ AM62AX_MCU_IOPAD(0x0030, PIN_OUTPUT, 0) /* (C8) 
>> WKUP_UART0_RTSn */
>>       };
>>   };
>> +&cpsw_mac_syscon {
>> +    bootph-all;
> 
> Seems you need this because cpsw_port1 uses it though a phandle reference.
> cpsw_port1 has bootph-all, why is this property not transitive though
> phandles? Would not having that cause missing references when the phandles
> are resolved to nodes that get dropped for some given boot stage?
> 

Yes, the bootph-all property is not automatically transitive through 
phandle references in the U-Boot SPL DT. Nodes that are only referenced 
by phandle from a bootph-annotated node are not themselves retained
unless they also carry a bootph-* property. This is because the way
fdtgrep works[1], it only keeps node with the tags present and implies
that property to the parent nodes and not the nodes referenced by
"phandle".

Without bootph-all in cpsw_mac_syscon, the SPL device tree will drop
that node, leaving the phandle in cpsw_port1 unresolved. And the above
claim can be validated with the current conifguration where "bootph-all"
tag is not present in cpsw_mac_syscon, causing CPSW to fail retrieve MAC
address.

[1]: https://github.com/u-boot/u-boot/blob/master/scripts/Makefile.lib#L688

Regards,
Chintan.

> Andrew
> 
>> +};
>> +
>>   /* WKUP UART0 is used for DM firmware logs */
>>   &wkup_uart0 {
>>       pinctrl-names = "default";
>