[PATCH v7 3/4] reset: cix: add sky1 audss auxiliary reset driver

[Joakim Zhang]

Hi

> -----Original Message-----
> From: Philipp Zabel <p.zabel at pengutronix.de>
> Sent: Tuesday, June 30, 2026 5:38 PM
> To: Joakim Zhang <joakim.zhang at cixtech.com>; mturquette at baylibre.com;
> sboyd at kernel.org; bmasney at redhat.com; robh at kernel.org;
> krzk+dt at kernel.org; conor+dt at kernel.org
> Cc: cix-kernel-upstream <cix-kernel-upstream at cixtech.com>; linux-
> clk at vger.kernel.org; devicetree at vger.kernel.org; linux-kernel at vger.kernel.org;
> linux-arm-kernel at lists.infradead.org
> Subject: Re: [PATCH v7 3/4] reset: cix: add sky1 audss auxiliary reset driver
> 
> EXTERNAL EMAIL
> 
> CAUTION: Suspicious Email from unusual domain.
> 
> On Mo, 2026-06-29 at 17:14 +0800, joakim.zhang at cixtech.com wrote:
> > From: Joakim Zhang <joakim.zhang at cixtech.com>
> >
> > Add an auxiliary reset controller driver for the AUDSS CRU. Sixteen
> > software reset lines for audio subsystem peripherals are controlled
> > through one register in the CRU register map.
> >
> > The driver is created by the AUDSS clock platform driver and registers
> > the reset controller on the CRU device node.
> >
> > Signed-off-by: Joakim Zhang <joakim.zhang at cixtech.com>
> > ---
> >  drivers/reset/Kconfig            |  14 ++++
> >  drivers/reset/Makefile           |   1 +
> >  drivers/reset/reset-sky1-audss.c | 137
> > +++++++++++++++++++++++++++++++
> >  3 files changed, 152 insertions(+)
> >  create mode 100644 drivers/reset/reset-sky1-audss.c
> >
> > diff --git a/drivers/reset/Kconfig b/drivers/reset/Kconfig index
> > d009eb0849a3..f74859b292ae 100644
> > --- a/drivers/reset/Kconfig
> > +++ b/drivers/reset/Kconfig
> > @@ -300,6 +300,20 @@ config RESET_SKY1
> >       help
> >         This enables the reset controller for Cix Sky1.
> >
> > +config RESET_SKY1_AUDSS
> > +     tristate "Cix Sky1 Audio Subsystem reset controller"
> > +     depends on ARCH_CIX || COMPILE_TEST
> > +     select AUXILIARY_BUS
> > +     select REGMAP_MMIO
> 
> This driver doesn't need REGMAP_MMIO itself, it just inherits its parent's
> regmap.
Dropped.

Thanks,
Joakim