[PATCH 5/5] arm64: dts: ls1088a: describe the Lynx 10G SerDes blocks

[Ioana Ciornei]

Describe the two Lynx 10G SerDes blocks and their associated lanes found
on the LS1088A SoC. The nodes are left disabled at the SoC level; board
DTs will enable them once there are consumers.

Signed-off-by: Ioana Ciornei <ioana.ciornei at nxp.com>
---
 .../arm64/boot/dts/freescale/fsl-ls1088a.dtsi | 58 +++++++++++++++++++
 1 file changed, 58 insertions(+)

diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi
index 99016768b73f..dcf13ac1fce5 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi
@@ -239,6 +239,64 @@ reset: syscon at 1e60000 {
 			reg = <0x0 0x1e60000 0x0 0x10000>;
 		};
 
+		serdes1: phy at 1ea0000 {
+			compatible = "fsl,ls1088a-serdes1";
+			reg = <0x00 0x1ea0000 0x0 0xffff>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			#phy-cells = <1>;
+			status = "disabled";
+
+			serdes1_lane_a: phy at 0 {
+				reg = <0>;
+				#phy-cells = <0>;
+			};
+
+			serdes1_lane_b: phy at 1 {
+				reg = <1>;
+				#phy-cells = <0>;
+			};
+
+			serdes1_lane_c: phy at 2 {
+				reg = <2>;
+				#phy-cells = <0>;
+			};
+
+			serdes1_lane_d: phy at 3 {
+				reg = <3>;
+				#phy-cells = <0>;
+			};
+		};
+
+		serdes2: phy at 1eb0000 {
+			compatible = "fsl,ls1088a-serdes2";
+			reg = <0x00 0x1eb0000 0x0 0xffff>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			#phy-cells = <1>;
+			status = "disabled";
+
+			serdes2_lane_a: phy at 0 {
+				reg = <0>;
+				#phy-cells = <0>;
+			};
+
+			serdes2_lane_b: phy at 1 {
+				reg = <1>;
+				#phy-cells = <0>;
+			};
+
+			serdes2_lane_c: phy at 2 {
+				reg = <2>;
+				#phy-cells = <0>;
+			};
+
+			serdes2_lane_d: phy at 3 {
+				reg = <3>;
+				#phy-cells = <0>;
+			};
+		};
+
 		isc: syscon at 1f70000 {
 			compatible = "fsl,ls1088a-isc", "syscon";
 			reg = <0x0 0x1f70000 0x0 0x10000>;
-- 
2.25.1