[PATCH V4 2/7] arm: dts: imx6sx-sdb: Move power supply property to Root Port node

[Sherry Sun (OSS)]

From: Sherry Sun <sherry.sun at nxp.com>

Move the power supply property from the PCIe controller node to the Root
Port child node to support the new PCI pwrctrl framework.

Signed-off-by: Sherry Sun <sherry.sun at nxp.com>
---
 arch/arm/boot/dts/nxp/imx/imx6sx-sdb.dtsi | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/nxp/imx/imx6sx-sdb.dtsi b/arch/arm/boot/dts/nxp/imx/imx6sx-sdb.dtsi
index 338de4d144b2..41a69fe83be8 100644
--- a/arch/arm/boot/dts/nxp/imx/imx6sx-sdb.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6sx-sdb.dtsi
@@ -284,12 +284,12 @@ &pcie {
 	pinctrl-0 = <&pinctrl_pcie>;
 	/* This property is deprecated, use reset-gpios from the Root Port node. */
 	reset-gpio = <&gpio2 0 GPIO_ACTIVE_LOW>;
-	vpcie-supply = <&reg_pcie_gpio>;
 	status = "okay";
 };
 
 &pcie_port0 {
 	reset-gpios = <&gpio2 0 GPIO_ACTIVE_LOW>;
+	vpcie3v3-supply = <&reg_pcie_gpio>;
 };
 
 &lcdif1 {
-- 
2.50.1