[PATCH v2 3/6] clk: sunxi-ng: sun6i-rtc: Add feature bit for IOSC calibration

[Jerome Brunet]

From: Junhui Liu <junhui.liu at pigmoral.tech>

The sun6i-rtc CCU driver currently uses a global static variable to
denote whether calibration is supported, which makes IOSC operations
tightly coupled to this file.

Convert this into a feature bit to decouple the logic. This allows the
IOSC clock code to be moved into a shared module for reuse by other SoCs.

Signed-off-by: Junhui Liu <junhui.liu at pigmoral.tech>
Signed-off-by: Jerome Brunet<jbrunet at baylibre.com>
---
 drivers/clk/sunxi-ng/ccu-sun6i-rtc.c | 17 +++++++++--------
 drivers/clk/sunxi-ng/ccu_common.h    |  1 +
 2 files changed, 10 insertions(+), 8 deletions(-)

diff --git a/drivers/clk/sunxi-ng/ccu-sun6i-rtc.c b/drivers/clk/sunxi-ng/ccu-sun6i-rtc.c
index 0f528bfaed00..b24c8b196e66 100644
--- a/drivers/clk/sunxi-ng/ccu-sun6i-rtc.c
+++ b/drivers/clk/sunxi-ng/ccu-sun6i-rtc.c
@@ -52,8 +52,6 @@ struct sun6i_rtc_match_data {
 	u8				osc32k_fanout_nparents;
 };
 
-static bool have_iosc_calibration;
-
 static int ccu_iosc_enable(struct clk_hw *hw)
 {
 	struct ccu_common *cm = hw_to_ccu_common(hw);
@@ -80,7 +78,7 @@ static unsigned long ccu_iosc_recalc_rate(struct clk_hw *hw,
 {
 	struct ccu_common *cm = hw_to_ccu_common(hw);
 
-	if (have_iosc_calibration) {
+	if (cm->features & CCU_FEATURE_IOSC_CALIBRATION) {
 		u32 reg = readl(cm->base + IOSC_CLK_CALI_REG);
 
 		/*
@@ -119,7 +117,7 @@ static int ccu_iosc_32k_prepare(struct clk_hw *hw)
 	struct ccu_common *cm = hw_to_ccu_common(hw);
 	u32 val;
 
-	if (!have_iosc_calibration)
+	if (!(cm->features & CCU_FEATURE_IOSC_CALIBRATION))
 		return 0;
 
 	val = readl(cm->base + IOSC_CLK_CALI_REG);
@@ -134,7 +132,7 @@ static void ccu_iosc_32k_unprepare(struct clk_hw *hw)
 	struct ccu_common *cm = hw_to_ccu_common(hw);
 	u32 val;
 
-	if (!have_iosc_calibration)
+	if (!(cm->features & CCU_FEATURE_IOSC_CALIBRATION))
 		return;
 
 	val = readl(cm->base + IOSC_CLK_CALI_REG);
@@ -148,7 +146,7 @@ static unsigned long ccu_iosc_32k_recalc_rate(struct clk_hw *hw,
 	struct ccu_common *cm = hw_to_ccu_common(hw);
 	u32 val;
 
-	if (have_iosc_calibration) {
+	if (cm->features & CCU_FEATURE_IOSC_CALIBRATION) {
 		val = readl(cm->base + IOSC_CLK_CALI_REG);
 
 		/* Assume the calibrated 32k clock is accurate. */
@@ -167,7 +165,7 @@ static unsigned long ccu_iosc_32k_recalc_accuracy(struct clk_hw *hw,
 	struct ccu_common *cm = hw_to_ccu_common(hw);
 	u32 val;
 
-	if (have_iosc_calibration) {
+	if (cm->features & CCU_FEATURE_IOSC_CALIBRATION) {
 		val = readl(cm->base + IOSC_CLK_CALI_REG);
 
 		/* Assume the calibrated 32k clock is accurate. */
@@ -358,7 +356,10 @@ int sun6i_rtc_ccu_probe(struct device *dev, void __iomem *reg)
 		return 0;
 
 	data = match->data;
-	have_iosc_calibration = data->have_iosc_calibration;
+	if (data->have_iosc_calibration) {
+		iosc_clk.features |= CCU_FEATURE_IOSC_CALIBRATION;
+		iosc_32k_clk.features |= CCU_FEATURE_IOSC_CALIBRATION;
+	}
 
 	if (!data->have_ext_osc32k) {
 		/* ext-osc32k-gate is an orphan, so do not register it. */
diff --git a/drivers/clk/sunxi-ng/ccu_common.h b/drivers/clk/sunxi-ng/ccu_common.h
index bbec283b9d99..d9dc24ad5503 100644
--- a/drivers/clk/sunxi-ng/ccu_common.h
+++ b/drivers/clk/sunxi-ng/ccu_common.h
@@ -21,6 +21,7 @@
 #define CCU_FEATURE_CLOSEST_RATE	BIT(9)
 #define CCU_FEATURE_DUAL_DIV		BIT(10)
 #define CCU_FEATURE_UPDATE_BIT		BIT(11)
+#define CCU_FEATURE_IOSC_CALIBRATION	BIT(12)
 
 /* MMC timing mode switch bit */
 #define CCU_MMC_NEW_TIMING_MODE		BIT(30)

-- 
2.47.3