[PATCH v2 1/4] dt-bindings: connector: Add fsl,aud-io-slot binding

[Rob Herring (Arm)]

On Mon, 29 Jun 2026 16:47:31 +0900, chancel.liu at oss.nxp.com wrote:
> From: Chancel Liu <chancel.liu at nxp.com>
> 
> The NXP AUD-IO slot represents a physically present I/O connector on
> the base board. It acts as a nexus that exposes a constrained set of
> I/O resources, such as GPIOs, clocks and interrupts, through fixed
> electrical wiring. All actual hardware providers reside on the base
> board. The connector node only defines index-based mappings to those
> providers.
> 
> This connector type is present on i.MX95 19x19 EVK and i.MX952 EVK,
> where it is used to attach the IMX-AUD-IO audio expansion card[1]. The
> same add-on board can be reused across different base boards that carry
> this connector.
> 
> [1]https://www.nxp.com/part/IMX-AUD-IO
> 
> Signed-off-by: Chancel Liu <chancel.liu at nxp.com>
> ---
>  .../bindings/connector/fsl,aud-io-slot.yaml   | 113 ++++++++++++++++++
>  1 file changed, 113 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/connector/fsl,aud-io-slot.yaml
> 

My bot found errors running 'make dt_binding_check' on your patch:

yamllint warnings/errors:

dtschema/dtc warnings/errors:
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/connector/fsl,aud-io-slot.yaml: clock-map: missing type definition
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/connector/fsl,aud-io-slot.yaml: clock-map-mask: missing type definition
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/connector/fsl,aud-io-slot.yaml: clock-map-pass-thru: missing type definition
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/connector/fsl,aud-io-slot.yaml: Unresolvable reference: /schemas/clock/clock-nexus-node.yaml#
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/connector/fsl,aud-io-slot.example.dtb: connector (fsl,imx95-19x19-evk-aud-io): False schema does not allow {'compatible': ['fsl,imx95-19x19-evk-aud-io'], 'gpio-controller': True, '#gpio-cells': 2, 'gpio-map': [[0, 0, 4294967295, 8, 1]], 'gpio-map-mask': [65535, 0], 'gpio-map-pass-thru': [0, 1], '#clock-cells': 1, 'clock-map': [0, 4294967295, 1], 'clock-map-mask': [255], '#address-cells': 0, 'interrupt-controller': True, '#interrupt-cells': 2, 'interrupt-map-mask': [65535, 0], 'interrupt-map': [[0, 0, 4294967295, 27, 8]], '$nodename': ['connector']}
	from schema $id: http://devicetree.org/schemas/connector/fsl,aud-io-slot.yaml

doc reference errors (make refcheckdocs):

See https://patchwork.kernel.org/project/devicetree/patch/20260629074734.3643227-2-chancel.liu@oss.nxp.com

The base for the series is generally the latest rc1. A different dependency
should be noted in *this* patch.

If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:

pip3 install dtschema --upgrade

Please check and re-submit after running the above command yourself. Note
that DT_SCHEMA_FILES can be set to your schema file to speed up checking
your schema. However, it must be unset to test all examples with your schema.