[PATCH v3 2/5] pinctrl: samsung: fix incorrect pin-bank entries on Exynos2200/7885/8890/8895

[Alim Akhtar]

Hi Krzysztof, Peter

> -----Original Message-----
> From: Peter Griffin <peter.griffin at linaro.org>
> Sent: Saturday, March 7, 2026 2:47 AM
> To: Youngmin Nam <youngmin.nam at samsung.com>
> Cc: krzk at kernel.org; s.nawrocki at samsung.com; alim.akhtar at samsung.com;
> linus.walleij at linaro.org; semen.protsenko at linaro.org;
> ivo.ivanov.ivanov1 at gmail.com; ryu.real at samsung.com;
> d7271.choe at samsung.com; shin.son at samsung.com;
> jaewon02.kim at samsung.com; linux-arm-kernel at lists.infradead.org; linux-
> samsung-soc at vger.kernel.org; linux-gpio at vger.kernel.org; linux-
> kernel at vger.kernel.org
> Subject: Re: [PATCH v3 2/5] pinctrl: samsung: fix incorrect pin-bank entries on
> Exynos2200/7885/8890/8895
> 
> Hi Youngmin,
> 
> On Tue, 2 Dec 2025 at 09:30, Youngmin Nam
> <youngmin.nam at samsung.com> wrote:
> >
> > This patch corrects wrong pin bank table definitions for 4 SoCs based
> > on their TRMs.
> >
> > Exynos2200
> > - gpq0/1/2 were using EXYNOS_PIN_BANK_EINTN(), which implies a
> >   'bank_type_off' layout (.fld_width = {4,1,2,2,2,2}).
> > - Per the SoC TRM these banks must use the 'alive' layout
> >   (.fld_width = {4,1,4,4}).
> > - Switch them to
> EXYNOS9_PIN_BANK_EINTN(exynos9_bank_type_alive, ...).
> >
> > Exynos7885
> > - etc0, etc1: update bank type to match the SoC TRM.
> > - gpq0 is a non-wakeup interrupt bank; change EINTW -> EINTN accordingly.
> >
> > Exynos8890
> > - Per the SoC TRM, rename bank ect0 to gpb3 and mark it as
> >   a non-external interrupt bank.
> > - gpi1, gpi2: update bank type to match the SoC TRM.
> >   exynos8895_bank_type_off (.fld_width = {4,1,2,3,2,2}) ->
> >   exynos5433_bank_type_off (.fld_width = {4,1,2,4,2,2})
> > - Per the SoC TRM, mark etc1 as a non-external interrupt bank.
> > - apply lower case style for hex numbers.
> >
> > Exynos8895
> > - gpa4 is a non-wakeup interrupt bank per the SoC TRM.
> >   change EINTW -> EINTN. (The bank_type itself was correct and is kept
> >   unchanged.)
> > - apply lower case style for hex numbers.
> >
> > This aligns the pin-bank tables with the documented bitfield layouts
> > and wakeup domains. No DT/ABI change.
> >
> > Signed-off-by: Youngmin Nam <youngmin.nam at samsung.com>
> > Reviewed-by: Sam Protsenko <semen.protsenko at linaro.org>
> > Reviewed-by: Ivaylo Ivanov <ivo.ivanov.ivanov1 at gmail.com>
> > Tested-by: Sam Protsenko <semen.protsenko at linaro.org>
> > ---
> 
> This patch contains some worthwhile fixes for multiple Exynos SoCs. Do you
> plan to re-send it? I think it would be good to get this merged (even if there
> isn't broad agreement around renaming the pinctrl macros to EXYNOS9_)
> 
Can we relook into this series? 
AFA EXYNOS9_ macro is concern, Exynos990, Exynos9810 etc already support available upstream.
Of course it does not justify why Exynos9, but we can consider all SoCs which has come after 2020 have this newer architecture. 
Or Just have SAMSUNG_ prefix for all such newer SoC.

A unified Macro help in adding new SoC support without much confusion(like I am trying with Exynos8855)

@Youngmin, will you have some time to re-spin these series?

> Thanks,
> 
> Peter