[PATCH v3 7/8] arm64: dts: qcom: shikra-cqs-evk: Enable A704 GPU

[Akhil P Oommen]

From: Aditya Sherawat <asherawa at qti.qualcomm.com>

Enable the A704 GPU and configure its zap-shader firmware on the
Shikra CQS EVK board.

Signed-off-by: Aditya Sherawat <asherawa at qti.qualcomm.com>
Signed-off-by: Akhil P Oommen <akhilpo at oss.qualcomm.com>
---
 arch/arm64/boot/dts/qcom/shikra-cqs-evk.dts | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/shikra-cqs-evk.dts b/arch/arm64/boot/dts/qcom/shikra-cqs-evk.dts
index b3f19a64d7ae..94ef498a2467 100644
--- a/arch/arm64/boot/dts/qcom/shikra-cqs-evk.dts
+++ b/arch/arm64/boot/dts/qcom/shikra-cqs-evk.dts
@@ -23,6 +23,14 @@ chosen {
 	};
 };
 
+&gpu {
+	status = "okay";
+};
+
+&gpu_zap_shader {
+	firmware-name = "qcom/shikra/a704_zap.mbn";
+};
+
 &sdhc_1 {
 	vmmc-supply = <&pm4125_l20>;
 	vqmmc-supply = <&pm4125_l14>;

-- 
2.51.0