[PATCH v3 4/7] arm64: dts: freescale: Convert to new media orientation definitions

[Kieran Bingham]

The orientation property for video interface devices now has definitions
to prevent hardcoded integer values for the enum options.

Update the users throughout the freescale/NXP device trees to use the new
definitions.

Reviewed-by: Laurent Pinchart <laurent.pinchart at ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham at ideasonboard.com>
---
 .../boot/dts/freescale/imx8mp-tqma8mpql-mba8mp-ras314-imx219.dtso      | 3 ++-
 arch/arm64/boot/dts/freescale/imx8mq-librem5.dtsi                      | 3 ++-
 2 files changed, 4 insertions(+), 2 deletions(-)

diff --git a/arch/arm64/boot/dts/freescale/imx8mp-tqma8mpql-mba8mp-ras314-imx219.dtso b/arch/arm64/boot/dts/freescale/imx8mp-tqma8mpql-mba8mp-ras314-imx219.dtso
index e5a2b3780215..7b44ae0f19b2 100644
--- a/arch/arm64/boot/dts/freescale/imx8mp-tqma8mpql-mba8mp-ras314-imx219.dtso
+++ b/arch/arm64/boot/dts/freescale/imx8mp-tqma8mpql-mba8mp-ras314-imx219.dtso
@@ -9,6 +9,7 @@
 
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/media/video-interfaces.h>
+#include <dt-bindings/media/video-interface-devices.h>
 
 #include "imx8mp-pinfunc.h"
 
@@ -47,7 +48,7 @@ camera at 10 {
 		VANA-supply = <&reg_cam>;
 		VDIG-supply = <&reg_cam>;
 		VDDL-supply = <&reg_cam>;
-		orientation = <2>;
+		orientation = <MEDIA_ORIENTATION_EXTERNAL>;
 		rotation = <0>;
 
 		port {
diff --git a/arch/arm64/boot/dts/freescale/imx8mq-librem5.dtsi b/arch/arm64/boot/dts/freescale/imx8mq-librem5.dtsi
index f5d529c5baf3..178cfad93483 100644
--- a/arch/arm64/boot/dts/freescale/imx8mq-librem5.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mq-librem5.dtsi
@@ -8,6 +8,7 @@
 #include "dt-bindings/input/input.h"
 #include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/leds/common.h>
+#include <dt-bindings/media/video-interface-devices.h>
 #include "dt-bindings/pwm/pwm.h"
 #include "dt-bindings/usb/pd.h"
 #include "imx8mq.dtsi"
@@ -1116,7 +1117,7 @@ camera_front: camera at 20 {
 		vddd-supply = <&reg_vcam_1v2>;
 		vddio-supply = <&reg_csi_1v8>;
 		rotation = <90>;
-		orientation = <0>;
+		orientation = <MEDIA_ORIENTATION_FRONT>;
 
 		port {
 			camera1_ep: endpoint {

-- 
2.52.0