[PATCH v2 5/8] arm64: dts: freescale: Convert to new media orientation definitions

[Laurent Pinchart]

On Fri, Jun 26, 2026 at 01:07:57PM +0100, Kieran Bingham wrote:
> The orientation property for video interface devices now has definitions
> to prevent hardcoded integer values for the enum options.
> 
> Update the users throughout the freescale/NXP device trees to use the new
> definitions.
> 
> Signed-off-by: Kieran Bingham <kieran.bingham at ideasonboard.com>

Reviewed-by: Laurent Pinchart <laurent.pinchart at ideasonboard.com>

> ---
>  .../boot/dts/freescale/imx8mp-tqma8mpql-mba8mp-ras314-imx219.dtso      | 3 ++-
>  arch/arm64/boot/dts/freescale/imx8mq-librem5.dtsi                      | 3 ++-
>  2 files changed, 4 insertions(+), 2 deletions(-)
> 
> diff --git a/arch/arm64/boot/dts/freescale/imx8mp-tqma8mpql-mba8mp-ras314-imx219.dtso b/arch/arm64/boot/dts/freescale/imx8mp-tqma8mpql-mba8mp-ras314-imx219.dtso
> index e5a2b3780215..7b44ae0f19b2 100644
> --- a/arch/arm64/boot/dts/freescale/imx8mp-tqma8mpql-mba8mp-ras314-imx219.dtso
> +++ b/arch/arm64/boot/dts/freescale/imx8mp-tqma8mpql-mba8mp-ras314-imx219.dtso
> @@ -9,6 +9,7 @@
>  
>  #include <dt-bindings/gpio/gpio.h>
>  #include <dt-bindings/media/video-interfaces.h>
> +#include <dt-bindings/media/video-interface-devices.h>
>  
>  #include "imx8mp-pinfunc.h"
>  
> @@ -47,7 +48,7 @@ camera at 10 {
>  		VANA-supply = <&reg_cam>;
>  		VDIG-supply = <&reg_cam>;
>  		VDDL-supply = <&reg_cam>;
> -		orientation = <2>;
> +		orientation = <MEDIA_ORIENTATION_EXTERNAL>;
>  		rotation = <0>;
>  
>  		port {
> diff --git a/arch/arm64/boot/dts/freescale/imx8mq-librem5.dtsi b/arch/arm64/boot/dts/freescale/imx8mq-librem5.dtsi
> index f5d529c5baf3..178cfad93483 100644
> --- a/arch/arm64/boot/dts/freescale/imx8mq-librem5.dtsi
> +++ b/arch/arm64/boot/dts/freescale/imx8mq-librem5.dtsi
> @@ -8,6 +8,7 @@
>  #include "dt-bindings/input/input.h"
>  #include <dt-bindings/interrupt-controller/irq.h>
>  #include <dt-bindings/leds/common.h>
> +#include <dt-bindings/media/video-interface-devices.h>
>  #include "dt-bindings/pwm/pwm.h"
>  #include "dt-bindings/usb/pd.h"
>  #include "imx8mq.dtsi"
> @@ -1116,7 +1117,7 @@ camera_front: camera at 20 {
>  		vddd-supply = <&reg_vcam_1v2>;
>  		vddio-supply = <&reg_csi_1v8>;
>  		rotation = <90>;
> -		orientation = <0>;
> +		orientation = <MEDIA_ORIENTATION_FRONT>;
>  
>  		port {
>  			camera1_ep: endpoint {

-- 
Regards,

Laurent Pinchart