[PATCH v2 2/8] media: dt-bindings: video-interface-devices: add video-interface-devices.h references

[Laurent Pinchart]

Hi Kieran,

Thank you for the patch.

On Fri, Jun 26, 2026 at 01:07:54PM +0100, Kieran Bingham wrote:
> Expand the documentation of the video-interface-devices orientation to
> reference the include/dt-bindings/media/video-interface-devices.h header
> which provides human readable defines for the orientation enum, to help
> avoid hardcoding values in dts.
> 
> Signed-off-by: Kieran Bingham <kieran.bingham at ideasonboard.com>
> ---
>  .../bindings/media/video-interface-devices.yaml         | 17 +++++++++++------
>  1 file changed, 11 insertions(+), 6 deletions(-)
> 
> diff --git a/Documentation/devicetree/bindings/media/video-interface-devices.yaml b/Documentation/devicetree/bindings/media/video-interface-devices.yaml
> index a81d2a155fe6..c9c3f4f16719 100644
> --- a/Documentation/devicetree/bindings/media/video-interface-devices.yaml
> +++ b/Documentation/devicetree/bindings/media/video-interface-devices.yaml
> @@ -392,17 +392,22 @@ properties:
>        The orientation of a device (typically an image sensor or a flash LED)
>        describing its mounting position relative to the usage orientation of the
>        system where the device is installed on.
> +      See include/dt-bindings/media/video-interface-devices.h.

If you want this to be a separate paragraph, you need a blnk line on
top. Otherwise, Move "See" to the previous line.

Reviewed-by: Laurent Pinchart <laurent.pinchart at ideasonboard.com>

> +
>      $ref: /schemas/types.yaml#/definitions/uint32
>      enum:
> -        # Front. The device is mounted on the front facing side of the system. For
> -        # mobile devices such as smartphones, tablets and laptops the front side
> -        # is the user facing side.
> +        # MEDIA_ORIENTATION_FRONT
> +        # The device is mounted on the front facing side of the system. For
> +        # mobile devices such as smartphones, tablets and laptops the front
> +        # side is the user facing side.
>        - 0
> -        # Back. The device is mounted on the back side of the system, which is
> +        # MEDIA_ORIENTATION_BACK
> +        # The device is mounted on the back side of the system, which is
>          # defined as the opposite side of the front facing one.
>        - 1
> -        # External. The device is not attached directly to the system but is
> -        # attached in a way that allows it to move freely.
> +        # MEDIA_ORIENTATION_EXTERNAL
> +        # The device is not attached directly to the system but is attached in
> +        # a way that allows it to move freely.
>        - 2
>  
>  additionalProperties: true

-- 
Regards,

Laurent Pinchart