[PATCH v2 3/8] dt-bindings: media: i2c: Utilise video-interface-devices enums
Vladimir Zapolskiy
vladimir.zapolskiy at linaro.org
Fri Jun 26 06:22:02 PDT 2026
On 6/26/26 15:07, Kieran Bingham wrote:
> The orientation property for video interface devices now has definitions
> to prevent hardcoded integer values for the enum options.
>
> Update the existing examples throughout the bindings documentation for
> camera sensors.
>
> Signed-off-by: Kieran Bingham <kieran.bingham at ideasonboard.com>
> ---
> Documentation/devicetree/bindings/media/i2c/hynix,hi846.yaml | 3 ++-
> Documentation/devicetree/bindings/media/i2c/ovti,ov08d10.yaml | 3 ++-
> Documentation/devicetree/bindings/media/i2c/ovti,ov4689.yaml | 3 ++-
> Documentation/devicetree/bindings/media/i2c/ovti,ov5675.yaml | 3 ++-
> Documentation/devicetree/bindings/media/i2c/ovti,ov5693.yaml | 3 ++-
> Documentation/devicetree/bindings/media/i2c/ovti,ov64a40.yaml | 3 ++-
> Documentation/devicetree/bindings/media/i2c/sony,imx111.yaml | 3 ++-
> Documentation/devicetree/bindings/media/i2c/sony,imx355.yaml | 3 ++-
> Documentation/devicetree/bindings/media/i2c/sony,imx415.yaml | 3 ++-
> Documentation/devicetree/bindings/media/i2c/st,vd55g1.yaml | 3 ++-
> Documentation/devicetree/bindings/media/i2c/st,vd56g3.yaml | 3 ++-
> Documentation/devicetree/bindings/media/i2c/thine,thp7312.yaml | 3 ++-
> 12 files changed, 24 insertions(+), 12 deletions(-)
>
> diff --git a/Documentation/devicetree/bindings/media/i2c/hynix,hi846.yaml b/Documentation/devicetree/bindings/media/i2c/hynix,hi846.yaml
> index 1a57f2aa1982..b7bc6ba26e6e 100644
> --- a/Documentation/devicetree/bindings/media/i2c/hynix,hi846.yaml
> +++ b/Documentation/devicetree/bindings/media/i2c/hynix,hi846.yaml
> @@ -86,6 +86,7 @@ unevaluatedProperties: false
> examples:
> - |
> #include <dt-bindings/gpio/gpio.h>
> + #include <dt-bindings/media/video-interface-devices.h>
>
> i2c {
> #address-cells = <1>;
> @@ -102,7 +103,7 @@ examples:
> vddio-supply = <®_camera_vddio>;
> reset-gpios = <&gpio1 25 GPIO_ACTIVE_LOW>;
> shutdown-gpios = <&gpio5 4 GPIO_ACTIVE_LOW>;
> - orientation = <0>;
> + orientation = <MEDIA_ORIENTATION_FRONT>;
> rotation = <0>;
>
> port {
> diff --git a/Documentation/devicetree/bindings/media/i2c/ovti,ov08d10.yaml b/Documentation/devicetree/bindings/media/i2c/ovti,ov08d10.yaml
> index 6f2017c75125..b9c61395b24f 100644
> --- a/Documentation/devicetree/bindings/media/i2c/ovti,ov08d10.yaml
> +++ b/Documentation/devicetree/bindings/media/i2c/ovti,ov08d10.yaml
> @@ -69,6 +69,7 @@ examples:
> - |
> #include <dt-bindings/gpio/gpio.h>
> #include <dt-bindings/media/video-interfaces.h>
> + #include <dt-bindings/media/video-interface-devices.h>
>
> i2c {
> #address-cells = <1>;
> @@ -84,7 +85,7 @@ examples:
> avdd-supply = <&ov08d10_vdda_2v8>;
> dvdd-supply = <&ov08d10_vddd_1v2>;
>
> - orientation = <2>;
> + orientation = <MEDIA_ORIENTATION_EXTERNAL>;
> rotation = <0>;
>
> reset-gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
> diff --git a/Documentation/devicetree/bindings/media/i2c/ovti,ov4689.yaml b/Documentation/devicetree/bindings/media/i2c/ovti,ov4689.yaml
> index d96199031b66..fcd617848ce3 100644
> --- a/Documentation/devicetree/bindings/media/i2c/ovti,ov4689.yaml
> +++ b/Documentation/devicetree/bindings/media/i2c/ovti,ov4689.yaml
> @@ -96,6 +96,7 @@ unevaluatedProperties: false
> examples:
> - |
> #include <dt-bindings/gpio/gpio.h>
> + #include <dt-bindings/media/video-interface-devices.h>
>
> i2c {
> #address-cells = <1>;
> @@ -114,7 +115,7 @@ examples:
> powerdown-gpios = <&pio 107 GPIO_ACTIVE_LOW>;
> reset-gpios = <&pio 109 GPIO_ACTIVE_LOW>;
>
> - orientation = <2>;
> + orientation = <MEDIA_ORIENTATION_EXTERNAL>;
> rotation = <0>;
>
> port {
> diff --git a/Documentation/devicetree/bindings/media/i2c/ovti,ov5675.yaml b/Documentation/devicetree/bindings/media/i2c/ovti,ov5675.yaml
> index ad07204057f9..6df62fd0c0c0 100644
> --- a/Documentation/devicetree/bindings/media/i2c/ovti,ov5675.yaml
> +++ b/Documentation/devicetree/bindings/media/i2c/ovti,ov5675.yaml
> @@ -85,6 +85,7 @@ examples:
> - |
> #include <dt-bindings/clock/px30-cru.h>
> #include <dt-bindings/gpio/gpio.h>
> + #include <dt-bindings/media/video-interface-devices.h>
> #include <dt-bindings/pinctrl/rockchip.h>
>
> i2c {
> @@ -108,7 +109,7 @@ examples:
> dovdd-supply = <&vcc_2v8>;
>
> rotation = <90>;
> - orientation = <0>;
> + orientation = <MEDIA_ORIENTATION_FRONT>;
>
> port {
> ucam_out: endpoint {
> diff --git a/Documentation/devicetree/bindings/media/i2c/ovti,ov5693.yaml b/Documentation/devicetree/bindings/media/i2c/ovti,ov5693.yaml
> index 3368b3bd8ef2..5732657e1484 100644
> --- a/Documentation/devicetree/bindings/media/i2c/ovti,ov5693.yaml
> +++ b/Documentation/devicetree/bindings/media/i2c/ovti,ov5693.yaml
> @@ -103,6 +103,7 @@ examples:
> - |
> #include <dt-bindings/clock/px30-cru.h>
> #include <dt-bindings/gpio/gpio.h>
> + #include <dt-bindings/media/video-interface-devices.h>
> #include <dt-bindings/pinctrl/rockchip.h>
>
> i2c {
> @@ -126,7 +127,7 @@ examples:
> dovdd-supply = <&vcc_2v8>;
>
> rotation = <90>;
> - orientation = <0>;
> + orientation = <MEDIA_ORIENTATION_FRONT>;
>
> port {
> ucam_out: endpoint {
> diff --git a/Documentation/devicetree/bindings/media/i2c/ovti,ov64a40.yaml b/Documentation/devicetree/bindings/media/i2c/ovti,ov64a40.yaml
> index 2b6143aff391..24787c9aa155 100644
> --- a/Documentation/devicetree/bindings/media/i2c/ovti,ov64a40.yaml
> +++ b/Documentation/devicetree/bindings/media/i2c/ovti,ov64a40.yaml
> @@ -72,6 +72,7 @@ unevaluatedProperties: false
> examples:
> - |
> #include <dt-bindings/gpio/gpio.h>
> + #include <dt-bindings/media/video-interface-devices.h>
>
> i2c {
> #address-cells = <1>;
> @@ -87,7 +88,7 @@ examples:
> powerdown-gpios = <&gpio1 9 GPIO_ACTIVE_HIGH>;
> reset-gpios = <&gpio1 10 GPIO_ACTIVE_LOW>;
> rotation = <180>;
> - orientation = <2>;
> + orientation = <MEDIA_ORIENTATION_EXTERNAL>;
>
> port {
> endpoint {
> diff --git a/Documentation/devicetree/bindings/media/i2c/sony,imx111.yaml b/Documentation/devicetree/bindings/media/i2c/sony,imx111.yaml
> index 20f48d5e9b2d..56fb5f18f07b 100644
> --- a/Documentation/devicetree/bindings/media/i2c/sony,imx111.yaml
> +++ b/Documentation/devicetree/bindings/media/i2c/sony,imx111.yaml
> @@ -69,6 +69,7 @@ examples:
> - |
> #include <dt-bindings/gpio/gpio.h>
> #include <dt-bindings/media/video-interfaces.h>
> + #include <dt-bindings/media/video-interface-devices.h>
>
> i2c {
> #address-cells = <1>;
> @@ -84,7 +85,7 @@ examples:
> dvdd-supply = <&camera_vddd_1v2>;
> avdd-supply = <&camera_vdda_2v7>;
>
> - orientation = <1>;
> + orientation = <MEDIA_ORIENTATION_BACK>;
> rotation = <90>;
>
> nvmem = <&eeprom>;
> diff --git a/Documentation/devicetree/bindings/media/i2c/sony,imx355.yaml b/Documentation/devicetree/bindings/media/i2c/sony,imx355.yaml
> index 6050d7e7dcfe..b4a88eaa7ef2 100644
> --- a/Documentation/devicetree/bindings/media/i2c/sony,imx355.yaml
> +++ b/Documentation/devicetree/bindings/media/i2c/sony,imx355.yaml
> @@ -74,6 +74,7 @@ examples:
> - |
> #include <dt-bindings/clock/qcom,camcc-sdm845.h>
> #include <dt-bindings/gpio/gpio.h>
> + #include <dt-bindings/media/video-interface-devices.h>
>
> i2c {
> #address-cells = <1>;
> @@ -98,7 +99,7 @@ examples:
> pinctrl-0 = <&cam_front_default>;
>
> rotation = <270>;
> - orientation = <0>;
> + orientation = <MEDIA_ORIENTATION_FRONT>;
>
> port {
> cam_front_endpoint: endpoint {
> diff --git a/Documentation/devicetree/bindings/media/i2c/sony,imx415.yaml b/Documentation/devicetree/bindings/media/i2c/sony,imx415.yaml
> index 7c11e871dca6..69a37ff68db3 100644
> --- a/Documentation/devicetree/bindings/media/i2c/sony,imx415.yaml
> +++ b/Documentation/devicetree/bindings/media/i2c/sony,imx415.yaml
> @@ -86,6 +86,7 @@ unevaluatedProperties: false
> examples:
> - |
> #include <dt-bindings/gpio/gpio.h>
> + #include <dt-bindings/media/video-interface-devices.h>
>
> i2c {
> #address-cells = <1>;
> @@ -98,7 +99,7 @@ examples:
> clocks = <&clock_cam>;
> dvdd-supply = <&vcc1v1_cam>;
> lens-focus = <&vcm>;
> - orientation = <2>;
> + orientation = <MEDIA_ORIENTATION_EXTERNAL>;
> ovdd-supply = <&vcc1v8_cam>;
> reset-gpios = <&gpio_expander 14 GPIO_ACTIVE_LOW>;
> rotation = <180>;
> diff --git a/Documentation/devicetree/bindings/media/i2c/st,vd55g1.yaml b/Documentation/devicetree/bindings/media/i2c/st,vd55g1.yaml
> index 060ac6829b66..db9f0c15576c 100644
> --- a/Documentation/devicetree/bindings/media/i2c/st,vd55g1.yaml
> +++ b/Documentation/devicetree/bindings/media/i2c/st,vd55g1.yaml
> @@ -105,6 +105,7 @@ unevaluatedProperties: false
> examples:
> - |
> #include <dt-bindings/gpio/gpio.h>
> + #include <dt-bindings/media/video-interface-devices.h>
>
> i2c {
> #address-cells = <1>;
> @@ -123,7 +124,7 @@ examples:
> reset-gpios = <&gpio 5 GPIO_ACTIVE_LOW>;
> st,leds = <2>;
>
> - orientation = <2>;
> + orientation = <MEDIA_ORIENTATION_EXTERNAL>;
> rotation = <0>;
>
> port {
> diff --git a/Documentation/devicetree/bindings/media/i2c/st,vd56g3.yaml b/Documentation/devicetree/bindings/media/i2c/st,vd56g3.yaml
> index c6673b8539db..48db22ca4a7e 100644
> --- a/Documentation/devicetree/bindings/media/i2c/st,vd56g3.yaml
> +++ b/Documentation/devicetree/bindings/media/i2c/st,vd56g3.yaml
> @@ -107,6 +107,7 @@ unevaluatedProperties: false
> examples:
> - |
> #include <dt-bindings/gpio/gpio.h>
> + #include <dt-bindings/media/video-interface-devices.h>
>
> i2c {
> #address-cells = <1>;
> @@ -125,7 +126,7 @@ examples:
> reset-gpios = <&gpio 5 GPIO_ACTIVE_LOW>;
> st,leds = <6>;
>
> - orientation = <2>;
> + orientation = <MEDIA_ORIENTATION_EXTERNAL>;
> rotation = <0>;
>
> port {
> diff --git a/Documentation/devicetree/bindings/media/i2c/thine,thp7312.yaml b/Documentation/devicetree/bindings/media/i2c/thine,thp7312.yaml
> index bc339a7374b2..4a66cb711372 100644
> --- a/Documentation/devicetree/bindings/media/i2c/thine,thp7312.yaml
> +++ b/Documentation/devicetree/bindings/media/i2c/thine,thp7312.yaml
> @@ -173,6 +173,7 @@ examples:
> - |
> #include <dt-bindings/gpio/gpio.h>
> #include <dt-bindings/media/video-interfaces.h>
> + #include <dt-bindings/media/video-interface-devices.h>
>
> i2c {
> #address-cells = <1>;
> @@ -196,7 +197,7 @@ examples:
> vddgpio-0-supply = <&vsys_v4p2>;
> vddgpio-1-supply = <&vsys_v4p2>;
>
> - orientation = <0>;
> + orientation = <MEDIA_ORIENTATION_FRONT>;
> rotation = <0>;
>
> sensors {
>
Reviewed-by: Vladimir Zapolskiy <vladimir.zapolskiy at linaro.org>
--
Best wishes,
Vladimir
More information about the linux-arm-kernel
mailing list