[PATCH 2/4] dt-bindings: raspberrypi,bcm2835-firmware: Include 'reboot-mode.yaml'

[Gregor Herburger]

The Raspberry Pi firmware allows to set a reboot mode called tryboot
that allows to try booting from a different partition to allow updating
of the boot partition. Allow reboot mode properties by referencing the
reboot-mode schema.

Signed-off-by: Gregor Herburger <gregor.herburger at linutronix.de>
---
 .../devicetree/bindings/arm/bcm/raspberrypi,bcm2835-firmware.yaml    | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

diff --git a/Documentation/devicetree/bindings/arm/bcm/raspberrypi,bcm2835-firmware.yaml b/Documentation/devicetree/bindings/arm/bcm/raspberrypi,bcm2835-firmware.yaml
index 983ea80eaec97..30b490e0d9fb3 100644
--- a/Documentation/devicetree/bindings/arm/bcm/raspberrypi,bcm2835-firmware.yaml
+++ b/Documentation/devicetree/bindings/arm/bcm/raspberrypi,bcm2835-firmware.yaml
@@ -133,11 +133,14 @@ properties:
     required:
       - compatible
 
+allOf:
+  - $ref: /schemas/power/reset/reboot-mode.yaml#
+
 required:
   - compatible
   - mboxes
 
-additionalProperties: false
+unevaluatedProperties: false
 
 examples:
   - |

-- 
2.47.3