[PATCH] arm64: dts: ti: k3-am62a7-sk: Add bootph-all property in cpsw_mac_syscon node

[Chintan Vankar]

Ethernet boot requires CPSW node to be present starting from R5 SPL stage.
Add "bootph-all" property in CPSW MAC's eFuse node "cpsw_mac_syscon" to
enable this node during SPL stage along with later boot stage so that CPSW
port will get static MAC address.

Signed-off-by: Chintan Vankar <c-vankar at ti.com>
---

Hello All,

This patch is based on linux-next tagged next-20260623.

 arch/arm64/boot/dts/ti/k3-am62a7-sk.dts | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/arch/arm64/boot/dts/ti/k3-am62a7-sk.dts b/arch/arm64/boot/dts/ti/k3-am62a7-sk.dts
index 821a9705bb7d..d3b3675e7a8f 100644
--- a/arch/arm64/boot/dts/ti/k3-am62a7-sk.dts
+++ b/arch/arm64/boot/dts/ti/k3-am62a7-sk.dts
@@ -230,6 +230,10 @@ AM62AX_MCU_IOPAD(0x0030, PIN_OUTPUT, 0) /* (C8) WKUP_UART0_RTSn */
 	};
 };
 
+&cpsw_mac_syscon {
+	bootph-all;
+};
+
 /* WKUP UART0 is used for DM firmware logs */
 &wkup_uart0 {
 	pinctrl-names = "default";
-- 
2.34.1