[PATCH] arm64: dts: hisilicon: hi3798cv200: Drop unused clock-names and reset-names

[Krzysztof Kozlowski]

Neither Linux drivers nor DT bindings ever described or used clock-names
and reset-names for this SoC.  The binding allows clock-names only for
atmel,at91sam9g45-ehci and atmel,at91rm9200-ohci, but not for HiSilicon.
reset-names were never allowed.

Drop them from DTS to fix dtbs_check warnings:

  hi3798cv200-poplar.dtb: usb at 9880000 (generic-ohci): False schema does not allow ['bus', 'clk12', 'clk48']
  hi3798cv200-poplar.dtb: usb at 9880000 (generic-ohci): Unevaluated properties are not allowed ('reset-names' was unexpected)

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski at oss.qualcomm.com>
---
 arch/arm64/boot/dts/hisilicon/hi3798cv200.dtsi | 4 ----
 1 file changed, 4 deletions(-)

diff --git a/arch/arm64/boot/dts/hisilicon/hi3798cv200.dtsi b/arch/arm64/boot/dts/hisilicon/hi3798cv200.dtsi
index 2f4ad5da5e33..e5010c9d4c39 100644
--- a/arch/arm64/boot/dts/hisilicon/hi3798cv200.dtsi
+++ b/arch/arm64/boot/dts/hisilicon/hi3798cv200.dtsi
@@ -633,9 +633,7 @@ ohci: usb at 9880000 {
 			clocks = <&crg HISTB_USB2_BUS_CLK>,
 				 <&crg HISTB_USB2_12M_CLK>,
 				 <&crg HISTB_USB2_48M_CLK>;
-			clock-names = "bus", "clk12", "clk48";
 			resets = <&crg 0xb8 12>;
-			reset-names = "bus";
 			phys = <&usb2_phy1_port0>;
 			phy-names = "usb";
 			status = "disabled";
@@ -648,11 +646,9 @@ ehci: usb at 9890000 {
 			clocks = <&crg HISTB_USB2_BUS_CLK>,
 				 <&crg HISTB_USB2_PHY_CLK>,
 				 <&crg HISTB_USB2_UTMI_CLK>;
-			clock-names = "bus", "phy", "utmi";
 			resets = <&crg 0xb8 12>,
 				 <&crg 0xb8 16>,
 				 <&crg 0xb8 13>;
-			reset-names = "bus", "phy", "utmi";
 			phys = <&usb2_phy1_port0>;
 			phy-names = "usb";
 			status = "disabled";
-- 
2.53.0