[PATCH v2 1/4] dt-bindings: reset: nuvoton,ma35d1-reset: add simple-mfd and child node support

[Krzysztof Kozlowski]

On Thu, Jun 25, 2026 at 10:39:55AM +0800, Joey Lu wrote:
> The MA35D1 system-management syscon node hosts the USB PHY register
> block at offset 0x60.  To model usb-phy at 60 as a DT child of the syscon
> node the binding must allow:

Explain why do you need child node. If you have fixed device @0x60, you do
not need DT child node at all. Compatible implies that child existence.


> 
>   - simple-mfd as an optional third compatible so the MFD core can
>     instantiate child platform devices.
> 
>   - #address-cells and #size-cells (each const: 1) so child nodes can
>     carry a reg property.
> 
>   - An open child-node pattern (patternProperties "^.*@[0-9a-f]+$")
>     to pass dt-schema validation.

No. Do not explain what you did - we can read the diff. You must explain
WHY you are doing that.

> 
> Signed-off-by: Joey Lu <a0987203069 at gmail.com>
> ---
>  .../bindings/reset/nuvoton,ma35d1-reset.yaml        | 13 ++++++++++++-
>  1 file changed, 12 insertions(+), 1 deletion(-)
> 
> diff --git a/Documentation/devicetree/bindings/reset/nuvoton,ma35d1-reset.yaml b/Documentation/devicetree/bindings/reset/nuvoton,ma35d1-reset.yaml
> index 3ce7dcecd87a..1fda7e8f4b5d 100644
> --- a/Documentation/devicetree/bindings/reset/nuvoton,ma35d1-reset.yaml
> +++ b/Documentation/devicetree/bindings/reset/nuvoton,ma35d1-reset.yaml
> @@ -19,6 +19,8 @@ properties:
>      items:
>        - const: nuvoton,ma35d1-reset
>        - const: syscon
> +      - const: simple-mfd
> +    minItems: 2
>  
>    reg:
>      maxItems: 1
> @@ -26,6 +28,16 @@ properties:
>    '#reset-cells':
>      const: 1
>  
> +  '#address-cells':
> +    const: 1
> +
> +  '#size-cells':
> +    const: 1
> +
> +patternProperties:
> +  "^.*@[0-9a-f]+$":

This must be specific.

> +    type: object

Missing ref and additionalProps. Please look at other simple-mfd.

> +
>  required:
>    - compatible
>    - reg
> @@ -43,4 +55,3 @@ examples:
>          #reset-cells = <1>;
>      };
>  ...
> -
> -- 
> 2.43.0
>