[PATCH 0/2] arm64: Add Axiado AX3005 SoC and EVK support

[Swark Yang]

This series adds initial device tree support for the Axiado AX3005 SoC
and its evaluation board (EVK).

The AX3005 uses Cadence-derived UART/I2C/I3C/GPIO and Synopsys
DesignWare SPI IP blocks. These are already described by 
existing bindings, so the device tree reuses the "axiado,ax3000-*",
"cdns,*" and "snps,*" compatible strings; only a new SoC/board 
level compatible is added.

Patch 1 adds the AX3005 board/SoC compatible strings to the Axiado
platform binding.
Patch 2 adds the AX3005 SoC dtsi, the EVK board dts, and the Makefile
entry. The EVK enables the CPUs, timer, GPIO, UART, I2C, I3C, SPI and
USB controllers.

Validated with:
- make CHECK_DTBS=y axiado/ax3005-evk.dtb
- make dt_binding_check DT_SCHEMA_FILES=axiado.yaml
- boot-tested on the AX3005 EVK (to init CLI via ramfs)

Signed-off-by: Swark Yang <syang at axiado.com>
---
Swark Yang (2):
      dt-bindings: arm: axiado: add AX3005 EVK
      arm64: dts: axiado: Add initial support for AX3005 SoC and eval board

 Documentation/devicetree/bindings/arm/axiado.yaml |   6 +
 arch/arm64/boot/dts/axiado/Makefile               |   1 +
 arch/arm64/boot/dts/axiado/ax3005-evk.dts         | 327 +++++++++
 arch/arm64/boot/dts/axiado/ax3005.dtsi            | 843 ++++++++++++++++++++++
 4 files changed, 1177 insertions(+)
---
base-commit: 2b414a95b8f7307d42173ba9e580d6d3e2bcbfce
change-id: 20260617-upstream-axiado-ax3005-upstream-bb09780a2fdf

Best regards,
-- 
Swark Yang <syang at axiado.com>