[PATCH 4/5] arm64: dts: ti: k3-am62-verdin: Add Toradex DSI to LVDS adapter with the 10.1" V2 display
Leonardo Costa
leoreis.costa at gmail.com
Tue Jun 23 12:57:40 PDT 2026
From: Leonardo Costa <leonardo.costa at toradex.com>
Add a device tree overlay for the Toradex DSI to LVDS Adapter with the
Toradex Capacitive Touch Display 10.1" LVDS V2. The adapter connects to the
Verdin DSI_1 interface. It is based on the Texas Instruments SN65DSI84
DSI-to-LVDS bridge and drives an Opto Logic SCX1001511GGC49 10.1" WXGA TFT
LCD LVDS panel. Touch input is provided by an ILITEK ILI251x capacitive
touch controller.
Link: https://developer.toradex.com/hardware/accessories/add-ons/dsi-lvds-adapter
Link: https://developer.toradex.com/hardware/accessories/displays/capacitive-touch-display-101inch-lvds
Signed-off-by: Leonardo Costa <leonardo.costa at toradex.com>
---
arch/arm64/boot/dts/ti/Makefile | 5 +
...dsi-to-lvds-v2-panel-cap-touch-10inch.dtso | 143 ++++++++++++++++++
2 files changed, 148 insertions(+)
create mode 100644 arch/arm64/boot/dts/ti/k3-am625-verdin-dsi-to-lvds-v2-panel-cap-touch-10inch.dtso
diff --git a/arch/arm64/boot/dts/ti/Makefile b/arch/arm64/boot/dts/ti/Makefile
index 61ae9039e561d..8b90fef11cb32 100644
--- a/arch/arm64/boot/dts/ti/Makefile
+++ b/arch/arm64/boot/dts/ti/Makefile
@@ -34,6 +34,7 @@ dtb-$(CONFIG_ARCH_K3) += k3-am625-verdin-dev-mezzanine-panel-cap-touch-10inch-lv
dtb-$(CONFIG_ARCH_K3) += k3-am625-verdin-dev-nau8822-btl.dtbo
dtb-$(CONFIG_ARCH_K3) += k3-am625-verdin-dsi-to-hdmi.dtbo
dtb-$(CONFIG_ARCH_K3) += k3-am625-verdin-dsi-to-lvds-panel-cap-touch-10inch.dtbo
+dtb-$(CONFIG_ARCH_K3) += k3-am625-verdin-dsi-to-lvds-v2-panel-cap-touch-10inch.dtbo
dtb-$(CONFIG_ARCH_K3) += k3-am625-verdin-nonwifi-dahlia-dsi-to-hdmi.dtb
dtb-$(CONFIG_ARCH_K3) += k3-am625-verdin-nonwifi-dahlia-panel-cap-touch-10inch-dsi.dtb
dtb-$(CONFIG_ARCH_K3) += k3-am625-verdin-nonwifi-dahlia.dtb
@@ -231,6 +232,9 @@ k3-am625-sk-hdmi-audio-dtbs := k3-am625-sk.dtb k3-am62x-sk-hdmi-audio.dtbo
k3-am625-verdin-wifi-dev-dsi-to-lvds-panel-cap-touch-10inch-dtbs := \
k3-am625-verdin-wifi-dev.dtb \
k3-am625-verdin-dsi-to-lvds-panel-cap-touch-10inch.dtbo
+k3-am625-verdin-wifi-dev-dsi-to-lvds-v2-panel-cap-touch-10inch-dtbs := \
+ k3-am625-verdin-wifi-dev.dtb \
+ k3-am625-verdin-dsi-to-lvds-v2-panel-cap-touch-10inch.dtbo
k3-am625-verdin-wifi-dev-mezzanine-can-dtbs := k3-am625-verdin-wifi-dev.dtb \
k3-am625-verdin-dev-mezzanine-can.dtbo
k3-am625-verdin-wifi-dev-mezzanine-panel-cap-touch-10inch-lvds-dtbs := \
@@ -355,6 +359,7 @@ dtb- += k3-am625-beagleplay-csi2-ov5640.dtb \
k3-am625-sk-csi2-tevi-ov5640.dtb \
k3-am625-sk-hdmi-audio.dtb \
k3-am625-verdin-wifi-dev-dsi-to-lvds-panel-cap-touch-10inch.dtb \
+ k3-am625-verdin-wifi-dev-dsi-to-lvds-v2-panel-cap-touch-10inch.dtb \
k3-am625-verdin-wifi-dev-mezzanine-can.dtb \
k3-am625-verdin-wifi-dev-mezzanine-panel-cap-touch-10inch-lvds.dtb \
k3-am625-verdin-wifi-dev-nau8822-btl.dtb \
diff --git a/arch/arm64/boot/dts/ti/k3-am625-verdin-dsi-to-lvds-v2-panel-cap-touch-10inch.dtso b/arch/arm64/boot/dts/ti/k3-am625-verdin-dsi-to-lvds-v2-panel-cap-touch-10inch.dtso
new file mode 100644
index 0000000000000..dba0b6b9f02db
--- /dev/null
+++ b/arch/arm64/boot/dts/ti/k3-am625-verdin-dsi-to-lvds-v2-panel-cap-touch-10inch.dtso
@@ -0,0 +1,143 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright (c) Toradex
+ *
+ * Toradex DSI to LVDS Adapter on Verdin DSI_1 with Capacitive Touch Display 10.1"
+ * Used on Dahlia (X17) and Development Board (X48) that expose DSI_1 via an
+ * Samtec LSS-130 connector.
+ *
+ * https://developer.toradex.com/hardware/accessories/displays/capacitive-touch-display-101inch-lvds
+ * https://www.toradex.com/accessories/capacitive-touch-display-10.1-inch-lvds
+ * https://developer.toradex.com/hardware/accessories/add-ons/dsi-lvds-adapter
+ * https://www.toradex.com/accessories/verdin-dsi-to-lvds-adapter
+ */
+
+/dts-v1/;
+/plugin/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/pwm/pwm.h>
+
+&{/} {
+ backlight_pwm3: backlight-pwm3 {
+ compatible = "pwm-backlight";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2s_2_d_out_gpio>;
+ brightness-levels = <0 45 63 88 119 158 203 255>;
+ default-brightness-level = <4>;
+ /* Verdin I2S_2_D_OUT as GPIO (SODIMM 46) */
+ enable-gpios = <&main_gpio0 34 GPIO_ACTIVE_HIGH>;
+ power-supply = <®_3v3>;
+ /* Verdin PWM_3_DSI (SODIMM 19) */
+ pwms = <&epwm1 0 6666667 0>;
+ };
+
+ panel-lvds-bridge {
+ compatible = "optologic,scx1001511ggc49", "panel-lvds";
+ backlight = <&backlight_pwm3>;
+ data-mapping = "vesa-24";
+ height-mm = <136>;
+ width-mm = <217>;
+
+ /*
+ * The timings here are different from the nominal ones for the
+ * SCX1001511GGC49 display. They are adjusted to ensure that
+ * the Horizontal Front Porch is long enough for the Verdin
+ * AM62 DPI->DSI bridge (Toshiba TC358768) to enter/exit LP
+ * mode. This is required for the display pipeline to work
+ * correctly.
+ */
+ panel-timing {
+ clock-frequency = <69500000>;
+ hactive = <1280>;
+ hback-porch = <20>;
+ hfront-porch = <100>;
+ hsync-len = <24>;
+ vactive = <800>;
+ vback-porch = <5>;
+ vfront-porch = <5>;
+ vsync-len = <3>;
+ de-active = <1>;
+ hsync-active = <0>;
+ vsync-active = <0>;
+ pixelclk-active = <0>;
+ };
+
+ port {
+ panel_lvds_bridge_in: endpoint {
+ remote-endpoint = <&dsi_lvds_bridge_out>;
+ };
+ };
+ };
+};
+
+&dsi_bridge {
+ status = "okay";
+};
+
+&dsi_bridge_ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port at 1 {
+ reg = <1>;
+
+ dsi_bridge_out: endpoint {
+ remote-endpoint = <&dsi_lvds_bridge_in>;
+ };
+ };
+};
+
+&dss {
+ status = "okay";
+};
+
+/* Verdin I2C_1 */
+&main_i2c1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ bridge at 2c {
+ compatible = "ti,sn65dsi84";
+ reg = <0x2c>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_dsi1_bkl_en>;
+ /* Verdin GPIO_10_DSI (SODIMM 21) - DSI_1_BKL_EN */
+ enable-gpios = <&main_gpio0 30 GPIO_ACTIVE_HIGH>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port at 0 {
+ reg = <0>;
+
+ dsi_lvds_bridge_in: endpoint {
+ remote-endpoint = <&dsi_bridge_out>;
+ data-lanes = <1 2 3 4>;
+ };
+ };
+
+ port at 2 {
+ reg = <2>;
+
+ dsi_lvds_bridge_out: endpoint {
+ remote-endpoint = <&panel_lvds_bridge_in>;
+ };
+ };
+ };
+ };
+
+ touchscreen at 41 {
+ compatible = "ilitek,ili251x";
+ reg = <0x41>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_dsi1_int>, <&pinctrl_i2s_2_bclk_gpio>;
+ /* Verdin GPIO_9_DSI (SODIMM 17) - TOUCH_INT# */
+ interrupt-parent = <&main_gpio1>;
+ interrupts = <49 IRQ_TYPE_EDGE_RISING>;
+ /* Verdin I2S_2_BCLK (SODIMM 42) - TOUCH_RESET# */
+ reset-gpios = <&main_gpio0 35 GPIO_ACTIVE_LOW>;
+ };
+};
More information about the linux-arm-kernel
mailing list