[PATCH net v2 2/2] net: stmmac: dwmac-spacemit: Fix wrong irq definition

[Maxime Chevallier]

Hi,

On 6/23/26 09:46, Inochi Amaoto wrote:
> The current irq definition of the wake irq and the lpi irq
> is wrong, replace them with the right number and name.
> 
> Fixes: 30f0ba420ed3 ("net: stmmac: Add glue layer for Spacemit K3 SoC")
> Signed-off-by: Inochi Amaoto <inochiama at gmail.com>

Reviewed-by: Maxime Chevallier <maxime.chevallier at bootlin.com>

Maxime

> ---
>  drivers/net/ethernet/stmicro/stmmac/dwmac-spacemit.c | 4 ++--
>  1 file changed, 2 insertions(+), 2 deletions(-)
> 
> diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-spacemit.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-spacemit.c
> index 3bfb6d49be6c..322bdf167a4a 100644
> --- a/drivers/net/ethernet/stmicro/stmmac/dwmac-spacemit.c
> +++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-spacemit.c
> @@ -22,8 +22,8 @@
>  #define CTRL_PHY_INTF_RMII		FIELD_PREP(CTRL_PHY_INTF_MODE, 0)
>  #define CTRL_PHY_INTF_RGMII		FIELD_PREP(CTRL_PHY_INTF_MODE, 1)
>  #define CTRL_PHY_INTF_MII		FIELD_PREP(CTRL_PHY_INTF_MODE, 3)
> -#define CTRL_WAKE_IRQ_EN		BIT(9)
> -#define CTRL_PHY_IRQ_EN			BIT(12)
> +#define CTRL_LPI_IRQ_EN			BIT(9)
> +#define CTRL_WAKE_IRQ_EN		BIT(12)
>  
>  /* dline register bits */
>  #define RGMII_RX_DLINE_EN		BIT(0)