[PATCH v3 2/5] dmaengine: sun6i-dma: Add set_addr function pointer for variable address widths
Yuanshen Cao
alex.caoys at gmail.com
Sun Jun 21 18:36:24 PDT 2026
The A733 DMA controller supports higher address (up to 32G) compared to
previous generations. The existing `sun6i_dma_set_addr` function uses a
hardcoded logic for setting the high-address bits in the LLI parameters.
By moving `set_addr` into the `sun6i_dma_config` structure, we can
provide specialized implementations for different hardware. This allows
the A733 to use a version of `set_addr` that correctly handles its
specific `SRC_HIGH_ADDR_32G` and `DST_HIGH_ADDR_32G` in the `set_addr`
register later in the series.
Changes:
- Added `set_addr` function pointer to `struct sun6i_dma_config`.
- Refactored `sun6i_dma_set_addr` and introduced
`sun6i_dma_set_addr_a31/a100` (keeping the logic for previous
generations).
- Updated all existing configuration structs to include the new
`set_addr` pointer.
- Removed `has_high_addr` since the logic is replaced by
`sun6i_dma_set_addr_a100`.
Reviewed-by: Frank Li <Frank.Li at nxp.com>
Signed-off-by: Yuanshen Cao <alex.caoys at gmail.com>
---
drivers/dma/sun6i-dma.c | 35 +++++++++++++++++++++++++++++------
1 file changed, 29 insertions(+), 6 deletions(-)
diff --git a/drivers/dma/sun6i-dma.c b/drivers/dma/sun6i-dma.c
index ef3052c4ab36..9984b9033cbb 100644
--- a/drivers/dma/sun6i-dma.c
+++ b/drivers/dma/sun6i-dma.c
@@ -112,6 +112,7 @@
/* forward declaration */
struct sun6i_dma_dev;
+struct sun6i_dma_lli;
/*
* Hardware channels / ports representation
@@ -138,6 +139,8 @@ struct sun6i_dma_config {
void (*set_burst_length)(u32 *p_cfg, s8 src_burst, s8 dst_burst);
void (*set_drq)(u32 *p_cfg, s8 src_drq, s8 dst_drq);
void (*set_mode)(u32 *p_cfg, s8 src_mode, s8 dst_mode);
+ void (*set_addr)(struct sun6i_dma_dev *sdev, struct sun6i_dma_lli *v_lli,
+ dma_addr_t src, dma_addr_t dst);
void (*dump_com_regs)(struct sun6i_dma_dev *sdev);
u32 (*read_irq_en)(struct sun6i_dma_dev *sdev, u32 irq_reg);
void (*write_irq_en)(struct sun6i_dma_dev *sdev, u32 irq_reg, u32 irq_val);
@@ -147,7 +150,6 @@ struct sun6i_dma_config {
u32 dst_burst_lengths;
u32 src_addr_widths;
u32 dst_addr_widths;
- bool has_high_addr;
bool has_mbus_clk;
};
@@ -673,16 +675,30 @@ static int set_config(struct sun6i_dma_dev *sdev,
return 0;
}
-static inline void sun6i_dma_set_addr(struct sun6i_dma_dev *sdev,
+static void sun6i_dma_set_addr_a31(struct sun6i_dma_dev *sdev,
+ struct sun6i_dma_lli *v_lli,
+ dma_addr_t src, dma_addr_t dst)
+{
+ v_lli->src = lower_32_bits(src);
+ v_lli->dst = lower_32_bits(dst);
+}
+
+static void sun6i_dma_set_addr_a100(struct sun6i_dma_dev *sdev,
struct sun6i_dma_lli *v_lli,
dma_addr_t src, dma_addr_t dst)
{
v_lli->src = lower_32_bits(src);
v_lli->dst = lower_32_bits(dst);
- if (sdev->cfg->has_high_addr)
- v_lli->para |= SRC_HIGH_ADDR(upper_32_bits(src)) |
- DST_HIGH_ADDR(upper_32_bits(dst));
+ v_lli->para |= SRC_HIGH_ADDR(upper_32_bits(src)) |
+ DST_HIGH_ADDR(upper_32_bits(dst));
+}
+
+static inline void sun6i_dma_set_addr(struct sun6i_dma_dev *sdev,
+ struct sun6i_dma_lli *v_lli,
+ dma_addr_t src, dma_addr_t dst)
+{
+ sdev->cfg->set_addr(sdev, v_lli, src, dst);
}
static struct dma_async_tx_descriptor *sun6i_dma_prep_dma_memcpy(
@@ -1156,6 +1172,7 @@ static struct sun6i_dma_config sun6i_a31_dma_cfg = {
.set_burst_length = sun6i_set_burst_length_a31,
.set_drq = sun6i_set_drq_a31,
.set_mode = sun6i_set_mode_a31,
+ .set_addr = sun6i_dma_set_addr_a31,
.src_burst_lengths = BIT(1) | BIT(8),
.dst_burst_lengths = BIT(1) | BIT(8),
.src_addr_widths = BIT(DMA_SLAVE_BUSWIDTH_1_BYTE) |
@@ -1180,6 +1197,7 @@ static struct sun6i_dma_config sun8i_a23_dma_cfg = {
.set_burst_length = sun6i_set_burst_length_a31,
.set_drq = sun6i_set_drq_a31,
.set_mode = sun6i_set_mode_a31,
+ .set_addr = sun6i_dma_set_addr_a31,
.src_burst_lengths = BIT(1) | BIT(8),
.dst_burst_lengths = BIT(1) | BIT(8),
.src_addr_widths = BIT(DMA_SLAVE_BUSWIDTH_1_BYTE) |
@@ -1199,6 +1217,7 @@ static struct sun6i_dma_config sun8i_a83t_dma_cfg = {
.set_burst_length = sun6i_set_burst_length_a31,
.set_drq = sun6i_set_drq_a31,
.set_mode = sun6i_set_mode_a31,
+ .set_addr = sun6i_dma_set_addr_a31,
.src_burst_lengths = BIT(1) | BIT(8),
.dst_burst_lengths = BIT(1) | BIT(8),
.src_addr_widths = BIT(DMA_SLAVE_BUSWIDTH_1_BYTE) |
@@ -1225,6 +1244,7 @@ static struct sun6i_dma_config sun8i_h3_dma_cfg = {
.set_burst_length = sun6i_set_burst_length_h3,
.set_drq = sun6i_set_drq_a31,
.set_mode = sun6i_set_mode_a31,
+ .set_addr = sun6i_dma_set_addr_a31,
.src_burst_lengths = BIT(1) | BIT(4) | BIT(8) | BIT(16),
.dst_burst_lengths = BIT(1) | BIT(4) | BIT(8) | BIT(16),
.src_addr_widths = BIT(DMA_SLAVE_BUSWIDTH_1_BYTE) |
@@ -1247,6 +1267,7 @@ static struct sun6i_dma_config sun50i_a64_dma_cfg = {
.set_burst_length = sun6i_set_burst_length_h3,
.set_drq = sun6i_set_drq_a31,
.set_mode = sun6i_set_mode_a31,
+ .set_addr = sun6i_dma_set_addr_a31,
.src_burst_lengths = BIT(1) | BIT(4) | BIT(8) | BIT(16),
.dst_burst_lengths = BIT(1) | BIT(4) | BIT(8) | BIT(16),
.src_addr_widths = BIT(DMA_SLAVE_BUSWIDTH_1_BYTE) |
@@ -1269,6 +1290,7 @@ static struct sun6i_dma_config sun50i_a100_dma_cfg = {
.set_burst_length = sun6i_set_burst_length_h3,
.set_drq = sun6i_set_drq_h6,
.set_mode = sun6i_set_mode_h6,
+ .set_addr = sun6i_dma_set_addr_a100,
.src_burst_lengths = BIT(1) | BIT(4) | BIT(8) | BIT(16),
.dst_burst_lengths = BIT(1) | BIT(4) | BIT(8) | BIT(16),
.src_addr_widths = BIT(DMA_SLAVE_BUSWIDTH_1_BYTE) |
@@ -1279,7 +1301,6 @@ static struct sun6i_dma_config sun50i_a100_dma_cfg = {
BIT(DMA_SLAVE_BUSWIDTH_2_BYTES) |
BIT(DMA_SLAVE_BUSWIDTH_4_BYTES) |
BIT(DMA_SLAVE_BUSWIDTH_8_BYTES),
- .has_high_addr = true,
.has_mbus_clk = true,
SUN6I_DMA_IRQ_A31_COMMON_OPS
};
@@ -1293,6 +1314,7 @@ static struct sun6i_dma_config sun50i_h6_dma_cfg = {
.set_burst_length = sun6i_set_burst_length_h3,
.set_drq = sun6i_set_drq_h6,
.set_mode = sun6i_set_mode_h6,
+ .set_addr = sun6i_dma_set_addr_a31,
.src_burst_lengths = BIT(1) | BIT(4) | BIT(8) | BIT(16),
.dst_burst_lengths = BIT(1) | BIT(4) | BIT(8) | BIT(16),
.src_addr_widths = BIT(DMA_SLAVE_BUSWIDTH_1_BYTE) |
@@ -1320,6 +1342,7 @@ static struct sun6i_dma_config sun8i_v3s_dma_cfg = {
.set_burst_length = sun6i_set_burst_length_a31,
.set_drq = sun6i_set_drq_a31,
.set_mode = sun6i_set_mode_a31,
+ .set_addr = sun6i_dma_set_addr_a31,
.src_burst_lengths = BIT(1) | BIT(8),
.dst_burst_lengths = BIT(1) | BIT(8),
.src_addr_widths = BIT(DMA_SLAVE_BUSWIDTH_1_BYTE) |
--
2.54.0
More information about the linux-arm-kernel
mailing list