[PATCH v2 0/2] arm: dts: xilinx: Add MYIR MYS-7Z020-V2 board support

[Liu Yu]

This series adds basic device tree and binding documentation support
for the MYIR MYS-7Z020-V2 development board, which is based on the
Xilinx Zynq-7000 (XC7Z020) SoC.

The first patch introduces the device tree file enabling essential
hardware support such as the serial console, MicroSD, Gigabit Ethernet,
QSPI flash, and user LEDs/buttons. The second patch adds the corresponding
compatible string to the Xilinx SoC bindings documentation.

Changes in v2:
  - Add missing pinmux configuration (sdio0_cd) for MIO46 to correctly
    route the hardware SD card detect signal, resolving the automated
    review warning.

Liu Yu (2):
  dt-bindings: soc: xilinx: Add MYIR MYS-7Z020-V2 board
  arm: dts: xilinx: Add support for MYIR MYS-7Z020-V2 board

 .../bindings/soc/xilinx/xilinx.yaml           |   1 +
 arch/arm/boot/dts/xilinx/Makefile             |   1 +
 .../arm/boot/dts/xilinx/zynq-mys-7z020-v2.dts | 232 ++++++++++++++++++
 3 files changed, 234 insertions(+)
 create mode 100644 arch/arm/boot/dts/xilinx/zynq-mys-7z020-v2.dts

-- 
2.43.0