[PATCH v3 3/3] arm64: dts: amlogic: meson-axg: Disable pcie_phy node by default

[Jun Yan]

Set the pcie_phy node to "disabled" as it is not used on some boards
and should be enabled per-board when necessary.

This change suppresses the deferred probe warning:

platform ff644000.phy: deferred probe pending: (reason unknown)

The meson-axg dtsi now disables pcie_phy by default, so enable it
for the s400 board to support PCIe functionality.

Signed-off-by: Jun Yan <jerrysteve1101 at gmail.com>
---
 arch/arm64/boot/dts/amlogic/meson-axg-s400.dts | 4 ++++
 arch/arm64/boot/dts/amlogic/meson-axg.dtsi     | 1 +
 2 files changed, 5 insertions(+)

diff --git a/arch/arm64/boot/dts/amlogic/meson-axg-s400.dts b/arch/arm64/boot/dts/amlogic/meson-axg-s400.dts
index 285c6ac1dd61..7ba249cc3d56 100644
--- a/arch/arm64/boot/dts/amlogic/meson-axg-s400.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-axg-s400.dts
@@ -448,6 +448,10 @@ &pcieB {
 	status = "okay";
 };
 
+&pcie_phy {
+	status = "okay";
+};
+
 &pwm_ab {
 	status = "okay";
 	pinctrl-0 = <&pwm_a_x20_pins>;
diff --git a/arch/arm64/boot/dts/amlogic/meson-axg.dtsi b/arch/arm64/boot/dts/amlogic/meson-axg.dtsi
index 8ca3ac09b306..5b8ef98f6d03 100644
--- a/arch/arm64/boot/dts/amlogic/meson-axg.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-axg.dtsi
@@ -328,6 +328,7 @@ pcie_phy: phy at ff644000 {
 			phys = <&mipi_pcie_analog_dphy>;
 			phy-names = "analog";
 			#phy-cells = <0>;
+			status = "disabled";
 		};
 
 		pdm: audio-controller at ff632000 {
-- 
2.54.0