[PATCH v7 3/9] regulator: dt-bindings: Add MediaTek MT6392 PMIC

[Rob Herring]

On Mon, Jun 15, 2026 at 09:16:09AM +0200, Luca Leonardo Scorcia wrote:
> Add bindings for the regulators found in the MediaTek MT6392 PMIC,
> usually found in board designs using the MediaTek MT8516/MT8167 SoCs.
> 
> Signed-off-by: Luca Leonardo Scorcia <l.scorcia at gmail.com>
> ---
>  .../regulator/mediatek,mt6392-regulator.yaml  | 234 ++++++++++++++++++
>  .../regulator/mediatek,mt6392-regulator.h     |  24 ++
>  2 files changed, 258 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/regulator/mediatek,mt6392-regulator.yaml
>  create mode 100644 include/dt-bindings/regulator/mediatek,mt6392-regulator.h
> 
> diff --git a/Documentation/devicetree/bindings/regulator/mediatek,mt6392-regulator.yaml b/Documentation/devicetree/bindings/regulator/mediatek,mt6392-regulator.yaml
> new file mode 100644
> index 000000000000..197041df4ba1
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/regulator/mediatek,mt6392-regulator.yaml
> @@ -0,0 +1,234 @@
> +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/regulator/mediatek,mt6392-regulator.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: MediaTek MT6392 regulator
> +
> +maintainers:
> +  - Luca Leonardo Scorcia <l.scorcia at gmail.com>
> +
> +description:
> +  MT6392 is a power management system chip containing three buck converters and
> +  23 LDOs. All voltage regulators provided by the PMIC are described as
> +  sub-nodes of this node.
> +
> +properties:
> +  compatible:
> +    items:
> +      - const: mediatek,mt6392-regulator
> +
> +  vproc-supply:
> +    description: Supply for buck regulator vproc
> +  vcore-supply:
> +    description: Supply for buck regulator vcore
> +  vsys-supply:
> +    description: Supply for buck regulator vsys
> +  avddldo-supply:
> +    description: |

Don't need '|' if no formatting to preserve. Elsewhere too.

> +      Supply for AVDD LDOs (vm, vio18, vcn18, vcamd, vcamio). According to the data sheet
> +      this is an internal supply derived from vsys.
> +  ldo1-supply:
> +    description: Supply for LDOs group 1 (vaud28, vxo22, vaud22, vadc18, vcama, vrtc)
> +  ldo2-supply:
> +    description: Supply for LDOs group 2 (vcn35, vio28, vmc, vmch, vefuse, vdig18)
> +  ldo3-supply:
> +    description: Supply for LDOs group 3 (vusb, vemc3v3, vcamaf, vgp1, vgp2, vm25)
> +
> +patternProperties:
> +  "^v(core|proc|sys)$":
> +    description: Buck regulators
> +    type: object
> +    $ref: regulator.yaml#
> +    properties:
> +      regulator-allowed-modes:
> +        description: |
> +          BUCK regulators can set regulator-initial-mode and regulator-allowed-modes to
> +          values specified in dt-bindings/regulator/mediatek,mt6392-regulator.h
> +        items:
> +          enum: [0, 1]

           minItems: 1
           maxItems: 2

? Because if there are only 2 modes, can't have more entries than that, 
right? Though wouldn't 2 entries be the same as no property present 
because I would assume the default is all modes. I shouldn't have to 
assume though.


> +    unevaluatedProperties: false

Place this after $ref. Easier to read than after indented blocks.

> +
> +  "^v(adc18|camio|cn18|io18|xo22|m25|aud28|io28|rtc|usb)$":
> +    description: LDOs with fixed output and mode setting
> +    type: object
> +    $ref: regulator.yaml#
> +    properties:
> +      regulator-allowed-modes:
> +        description: |
> +          LDO regulators can set regulator-initial-mode and regulator-allowed-modes to
> +          values specified in dt-bindings/regulator/mediatek,mt6392-regulator.h
> +        items:
> +          enum: [0, 1]
> +    unevaluatedProperties: false
> +
> +  "^v(cama|dig18)$":
> +    description: LDOs with fixed output without mode setting
> +    type: object
> +    $ref: regulator.yaml#
> +    unevaluatedProperties: false
> +
> +  "^v(aud22|camaf|camd|cn35|efuse|emc3v3|gp1|gp2|m|mc|mch)$":
> +    description: LDOs with adjustable output
> +    type: object
> +    $ref: regulator.yaml#
> +    properties:
> +      regulator-allowed-modes: false
> +    unevaluatedProperties: false
> +
> +required:
> +  - compatible
> +
> +additionalProperties: false
> +
> +examples:
> +  - |
> +    #include <dt-bindings/interrupt-controller/arm-gic.h>
> +
> +    regulators {
> +      compatible = "mediatek,mt6392-regulator";

Drop the example. Put 1 complete example in the MFD schema rather than 
incomplete examples.

Rob