[PATCH v2] net: macb: add TX stall timeout callback to recover from lost TSTART write

[Nicolai Buchwitz]

On 16.6.2026 15:23, Andrea della Porta wrote:
> From: Lukasz Raczylo <lukasz at raczylo.com>
> 
> The MACB found in the Raspberry Pi RP1 suffers from sporadic stalls on
> the TX queue.
> While the exact root cause is not yet fully understood, it is likely
> related to a hardware issue where a TSTART write to the NCR register
> is missed, preventing the transmission from being kicked off.
> 
> Implement a timeout callback to handle TX queue stalls, triggering the
> existing restart mechanism to recover.
> 
> Link: 
> https://lore.kernel.org/all/20260514215459.36109-1-lukasz@raczylo.com/
> Fixes: dc110d1b23564 ("net: cadence: macb: Add support for Raspberry Pi 
> RP1 ethernet controller")
> Signed-off-by: Lukasz Raczylo <lukasz at raczylo.com>
> Co-developed-by: Steffen Jaeckel <sjaeckel at suse.de>
> Signed-off-by: Steffen Jaeckel <sjaeckel at suse.de>
> Co-developed-by: Andrea della Porta <andrea.porta at suse.com>
> Signed-off-by: Andrea della Porta <andrea.porta at suse.com>
> ---
> 
> CHANGES IN v2:
> 
> - dropped the rate-limited log message
> - avoid incrementing tx_error as this is per packet
> 
> ---
>  drivers/net/ethernet/cadence/macb_main.c | 8 ++++++++
>  1 file changed, 8 insertions(+)
> 
> diff --git a/drivers/net/ethernet/cadence/macb_main.c 
> b/drivers/net/ethernet/cadence/macb_main.c
> index a12aa21244e83..fd282a1700fb9 100644
> --- a/drivers/net/ethernet/cadence/macb_main.c
> +++ b/drivers/net/ethernet/cadence/macb_main.c
> @@ -4522,6 +4522,13 @@ static int macb_setup_tc(struct net_device *dev, 
> enum tc_setup_type type,
>  	}
>  }
> 
> +static void macb_tx_timeout(struct net_device *dev, unsigned int q)
> +{
> +	struct macb *bp = netdev_priv(dev);
> +
> +	macb_tx_restart(&bp->queues[q]);
> +}
> +
>  static const struct net_device_ops macb_netdev_ops = {
>  	.ndo_open		= macb_open,
>  	.ndo_stop		= macb_close,
> @@ -4540,6 +4547,7 @@ static const struct net_device_ops 
> macb_netdev_ops = {
>  	.ndo_hwtstamp_set	= macb_hwtstamp_set,
>  	.ndo_hwtstamp_get	= macb_hwtstamp_get,
>  	.ndo_setup_tc		= macb_setup_tc,
> +	.ndo_tx_timeout		= macb_tx_timeout,
>  };
> 
>  /* Configure peripheral capabilities according to device tree

Reviewed-by: Nicolai Buchwitz <nb at tipi-net.de>

Thanks,
Nicolai