[PATCH v2] [net] net: airoha: Stop TX queues on error path in airoha_dev_open

[Wayen Yan]

In airoha_dev_open(), if airoha_set_vip_for_gdm_port() fails after
netif_tx_start_all_queues() has been called, the TX queues remain
started while the device configuration is incomplete. This leaves
the device in an inconsistent state where packets could be
transmitted before the VIP/IFC port configuration is complete.

Add netif_tx_stop_all_queues() call on the error path to properly
roll back the TX queue state.

Fixes: 23020f049327 ("net: airoha: Introduce ethernet support for EN7581 SoC")
Signed-off-by: Wayen Yan <win847 at gmail.com>
---
 drivers/net/ethernet/airoha/airoha_eth.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/airoha/airoha_eth.c b/drivers/net/ethernet/airoha/airoha_eth.c
index 31cdb11cd7..cf9c366907 100644
--- a/drivers/net/ethernet/airoha/airoha_eth.c
+++ b/drivers/net/ethernet/airoha/airoha_eth.c
@@ -1715,8 +1715,10 @@ static int airoha_dev_open(struct net_device *dev)
 
 	netif_tx_start_all_queues(dev);
 	err = airoha_set_vip_for_gdm_port(port, true);
-	if (err)
+	if (err) {
+		netif_tx_stop_all_queues(dev);
 		return err;
+	}
 
 	if (netdev_uses_dsa(dev))
 		airoha_fe_set(qdma->eth, REG_GDM_INGRESS_CFG(port->id),
-- 
2.51.0