[RFC PATCH v4 7/9] arm64: dts: rockchip: rk356x: Add the NPU and its IOMMU
MidG971
midgy971 at gmail.com
Sat Jun 13 00:01:14 PDT 2026
From: Midgy BALON <midgy971 at gmail.com>
The RK3568 has an NVDLA-derived NPU at fde40000 with its own IOMMU at
fde4b000. Add both nodes (disabled by default) and the NPU power-domain
child under the PMU power-controller, and point rockchip,pmu at the PMU
syscon that controls the NPU NoC bus-idle.
Besides the SCMI compute clock, assign the CRU CLK_NPU so the NPU AXI
bus clock comes up at 200 MHz rather than the 12 MHz boot default.
The power-domain deliberately carries no pm_qos: qos_npu sits behind the
NPU NoC, which is gated until the NPU is brought up, so a genpd power-off
QoS save would fault reading it.
Signed-off-by: Midgy BALON <midgy971 at gmail.com>
---
arch/arm64/boot/dts/rockchip/rk356x-base.dtsi | 38 +++++++++++++++++++
1 file changed, 38 insertions(+)
diff --git a/arch/arm64/boot/dts/rockchip/rk356x-base.dtsi b/arch/arm64/boot/dts/rockchip/rk356x-base.dtsi
index 64bdd8b7754b5..313db59c1aed8 100644
--- a/arch/arm64/boot/dts/rockchip/rk356x-base.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk356x-base.dtsi
@@ -512,6 +512,13 @@ power-domain at RK3568_PD_GPU {
#power-domain-cells = <0>;
};
+ pd_npu: power-domain at RK3568_PD_NPU {
+ reg = <RK3568_PD_NPU>;
+ clocks = <&cru ACLK_NPU_PRE>,
+ <&cru HCLK_NPU_PRE>;
+ #power-domain-cells = <0>;
+ };
+
/* These power domains are grouped by VD_LOGIC */
power-domain at RK3568_PD_VI {
reg = <RK3568_PD_VI>;
@@ -572,6 +579,37 @@ power-domain at RK3568_PD_RKVENC {
};
};
+ rknn_core_0: npu at fde40000 {
+ compatible = "rockchip,rk3568-rknn-core";
+ reg = <0x0 0xfde40000 0x0 0x1000>,
+ <0x0 0xfde41000 0x0 0x1000>,
+ <0x0 0xfde43000 0x0 0x1000>;
+ reg-names = "pc", "cna", "core";
+ interrupts = <GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cru ACLK_NPU>, <&cru HCLK_NPU>,
+ <&scmi_clk SCMI_CLK_NPU>, <&cru PCLK_NPU_PRE>;
+ clock-names = "aclk", "hclk", "npu", "pclk";
+ assigned-clocks = <&scmi_clk SCMI_CLK_NPU>, <&cru CLK_NPU>;
+ assigned-clock-rates = <200000000>, <600000000>;
+ resets = <&cru SRST_A_NPU>, <&cru SRST_H_NPU>;
+ reset-names = "srst_a", "srst_h";
+ power-domains = <&power RK3568_PD_NPU>;
+ rockchip,pmu = <&pmu>;
+ iommus = <&rknn_mmu_0>;
+ status = "disabled";
+ };
+
+ rknn_mmu_0: iommu at fde4b000 {
+ compatible = "rockchip,iommu";
+ reg = <0x0 0xfde4b000 0x0 0x40>;
+ interrupts = <GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>;
+ clock-names = "aclk", "iface";
+ clocks = <&cru ACLK_NPU>, <&cru HCLK_NPU>;
+ power-domains = <&power RK3568_PD_NPU>;
+ #iommu-cells = <0>;
+ status = "disabled";
+ };
+
gpu: gpu at fde60000 {
compatible = "rockchip,rk3568-mali", "arm,mali-bifrost";
reg = <0x0 0xfde60000 0x0 0x4000>;
--
2.39.5
More information about the linux-arm-kernel
mailing list