[PATCH v5 18/18] phy: rockchip: usbdp: Add some extra debug messages

[Sebastian Reichel]

It's useful to log PHY reinit to ease debugging issues around
USB-C hotplugging.

Signed-off-by: Sebastian Reichel <sebastian.reichel at collabora.com>
---
 drivers/phy/rockchip/phy-rockchip-usbdp.c | 9 +++++++++
 1 file changed, 9 insertions(+)

diff --git a/drivers/phy/rockchip/phy-rockchip-usbdp.c b/drivers/phy/rockchip/phy-rockchip-usbdp.c
index 236331cc0d13..4042e2dd8121 100644
--- a/drivers/phy/rockchip/phy-rockchip-usbdp.c
+++ b/drivers/phy/rockchip/phy-rockchip-usbdp.c
@@ -491,6 +491,8 @@ static void rk_udphy_u3_port_disable(struct rk_udphy *udphy, u8 disable)
 	const struct rk_udphy_cfg *cfg = udphy->cfgs;
 	const struct rk_udphy_grf_reg *preg;
 
+	dev_dbg(udphy->dev, "USB3 port %s\n", str_on_off(!disable));
+
 	preg = udphy->id ? &cfg->grfcfg.usb3otg1_cfg : &cfg->grfcfg.usb3otg0_cfg;
 	rk_udphy_grfreg_write(udphy->usbgrf, preg, disable);
 }
@@ -784,6 +786,10 @@ static int rk_udphy_init(struct rk_udphy *udphy)
 	const struct rk_udphy_cfg *cfg = udphy->cfgs;
 	int ret;
 
+	dev_dbg(udphy->dev, "(re-)init PHY with USB=%s and DP=%s\n",
+		str_enabled_disabled(udphy->mode & UDPHY_MODE_USB),
+		str_enabled_disabled(udphy->mode & UDPHY_MODE_DP));
+
 	rk_udphy_reset_assert_all(udphy);
 	usleep_range(10000, 11000);
 
@@ -854,6 +860,8 @@ static int rk_udphy_setup(struct rk_udphy *udphy)
 {
 	int ret;
 
+	dev_dbg(udphy->dev, "enable PHY\n");
+
 	ret = clk_bulk_prepare_enable(udphy->num_clks, udphy->clks);
 	if (ret) {
 		dev_err(udphy->dev, "failed to enable clk\n");
@@ -872,6 +880,7 @@ static int rk_udphy_setup(struct rk_udphy *udphy)
 
 static void rk_udphy_disable(struct rk_udphy *udphy)
 {
+	dev_dbg(udphy->dev, "disable PHY\n");
 	clk_bulk_disable_unprepare(udphy->num_clks, udphy->clks);
 	rk_udphy_reset_assert_all(udphy);
 }

-- 
2.53.0