[PATCH v1 phy-next 0/8] RCW override for 10G Lynx dynamic protocol reconfiguration

[Vladimir Oltean]

Previous set "New Generic PHY driver for Lynx 10G SerDes":
https://lore.kernel.org/linux-phy/20260610151952.2141019-1-vladimir.oltean@nxp.com/
introduced the 10G Lynx SerDes driver with a reduced functionality set.
Namely, only minor protocol changes are supported (1GbE <-> 2.5GbE).
The major protocol changes need a procedure named RCW override,
explained in more detail in commits 6/8 and 7/8.

To keep the ball roling, this series adds kernel and device tree binding
support for RCW override. (being so close to the merge window, I don't
really expect this series to be merged, just want to get an initial
feedback so I can keep working on it)

Two components are involved:
- drivers/soc/fsl/guts.c (binding is fsl,layerscape-dcfg.yaml) - Device
  Configuration Unit, this is API provider for the SerDes driver to
  request RCW override depending on SoC
- drivers/phy/freescale/phy-fsl-lynx-10g.c - SerDes PHY driver, this is
  API consumer

The guts driver probes on DCFG blocks from multiple Freescale SoC
generations:
- MPC85xx, BSC and QorIQ (PowerPC) are all covered by the
  Documentation/devicetree/bindings/soc/fsl/guts.txt schema
- Layerscape (Arm) is covered by
  Documentation/devicetree/bindings/soc/fsl/fsl,layerscape-dcfg.yaml

It is ultimately the same hardware block, just that (from what I can
tell) the Layerscape nodes are also compatible with syscon, and PowerPC
aren't.

RCW override has only been validated on select Layerscape SoCs, so
converting guts.txt to a PowerPC schema is out of scope for this
series - we don't even touch that (just in case it gets asked).

Using syscon to map the DCFG_DCSR register block in the Lynx SerDes
driver instead of creating this guts <-> lynx API was considered, but
because the RCW procedure is SoC-specific, it was ruled out for
polluting the SerDes driver. The guts driver is all about SoC awareness
anyway, and it offers some abstraction of all the gory details.

Cc: Conor Dooley <conor at kernel.org>
Cc: Krzysztof Kozlowski <krzysztof.kozlowski+dt at linaro.org>
Cc: Rob Herring <robh at kernel.org>

Ioana Ciornei (5):
  soc: fsl: guts: use a macro to encode the DCFG CCSR space
  soc: fsl: guts: add a global structure to hold state
  soc: fsl: guts: add a central fsl_guts_read() function
  soc: fsl: guts: make it easier to determine on which SoC we are
    running
  soc: fsl: guts: implement the RCW override procedure

Vladimir Oltean (3):
  soc: fsl: guts: make fsl_soc_data available after fsl_guts_init()
  dt-bindings: fsl: layerscape-dcfg: define DCFG_DCSR region
  phy: lynx-10g: use RCW override procedure for dynamic protocol change

 .../bindings/soc/fsl/fsl,layerscape-dcfg.yaml |  15 +-
 drivers/phy/freescale/Kconfig                 |   1 +
 drivers/phy/freescale/phy-fsl-lynx-10g.c      |  24 +-
 drivers/soc/fsl/guts.c                        | 370 ++++++++++++++++--
 include/linux/fsl/guts.h                      |  20 +-
 5 files changed, 394 insertions(+), 36 deletions(-)

-- 
2.34.1