[PATCH RFC 2/9] net: stmmac: qcom-ethqos: convert ethqos_rgmii_macro_init() to void

[Mohd Ayaan Anwar]

The return value is never checked by its sole caller and the speed
validation duplicates a check higher up the call stack.  Convert to
void and remove the dead code.

Signed-off-by: Mohd Ayaan Anwar <mohd.anwar at oss.qualcomm.com>
---
 drivers/net/ethernet/stmicro/stmmac/dwmac-qcom-ethqos.c | 10 +---------
 1 file changed, 1 insertion(+), 9 deletions(-)

diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-qcom-ethqos.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-qcom-ethqos.c
index ac7d6d3e205a1ab5b391def879d6f1033a0961b6..44270c25d874f72e7f971757fec659d36468c315 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac-qcom-ethqos.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-qcom-ethqos.c
@@ -371,9 +371,8 @@ static int ethqos_dll_configure(struct qcom_ethqos *ethqos)
 	return 0;
 }
 
-static int ethqos_rgmii_macro_init(struct qcom_ethqos *ethqos, int speed)
+static void ethqos_rgmii_macro_init(struct qcom_ethqos *ethqos, int speed)
 {
-	struct device *dev = &ethqos->pdev->dev;
 	unsigned int prg_rclk_dly, loopback;
 	unsigned int phase_shift;
 
@@ -384,11 +383,6 @@ static int ethqos_rgmii_macro_init(struct qcom_ethqos *ethqos, int speed)
 	/* Select RGMII, write 0 to interface select */
 	rgmii_clrmask(ethqos, RGMII_CONFIG_INTF_SEL, RGMII_IO_MACRO_CONFIG);
 
-	if (speed != SPEED_1000 && speed != SPEED_100 && speed != SPEED_10) {
-		dev_err(dev, "Invalid speed %d\n", speed);
-		return -EINVAL;
-	}
-
 	rgmii_setmask(ethqos, RGMII_CONFIG_DDR_MODE, RGMII_IO_MACRO_CONFIG);
 
 	if (speed == SPEED_1000) {
@@ -479,8 +473,6 @@ static int ethqos_rgmii_macro_init(struct qcom_ethqos *ethqos, int speed)
 
 	rgmii_updatel(ethqos, RGMII_CONFIG_LOOPBACK_EN, loopback,
 		      RGMII_IO_MACRO_CONFIG);
-
-	return 0;
 }
 
 static void ethqos_fix_mac_speed_rgmii(void *bsp_priv,

-- 
2.34.1